Gloucestershire · England
Bath re-enamelling & resurfacing in Poulton, Gloucestershire
Fixed-price bath re-enamelling in Poulton and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- A roll-top that’s seen better days
- A bath in a colour that no longer suits
Bath re-enamelling at your home in Poulton
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Typical jobs include an outdated colour you’d like to change and several chips and rust patches, across acrylic baths, cast iron baths and Victorian roll-tops.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Where
- Poulton (GL7)
- Region
- Gloucestershire
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath re-enamelling
Prices start from £350. There is no charge for travel to Poulton. The price depends on:
- The size and number of damaged areas
- The material
- Any earlier repairs that need removing first
- The type of damage
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
How to get a fixed quote
Phone pictures are fine. Just make sure we can see:
- Details of any past repairs
- A wider photo showing the entire bath
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Our work in Poulton
Poulton is about 5 miles east of Cirencester, in Gloucestershire. We visit customers in Poulton and nearby villages, so nothing has to leave your home. Poulton is one of 470 places in Gloucestershire where we work. You can also see our page for Birmingham, about 53 miles away.
Our visits in GL7 work the same way as everywhere else we cover. From London Road, Elf Meadow and Wheelers Rise or anywhere nearby, we can come to you. Close by, we cover Meysey Hampton (1 mile south-east), Sunhill (1 mile north-east), Ampney Crucis (2 miles west), Harnhill (2 miles west) and Down Ampney (2 miles south). We also work in nearby towns such as Cirencester (5 miles west), Tetbury (14 miles west), Charlton Park (15 miles north-west), Chalford (13 miles west), Bourton-on-the-Water (13 miles north) and Battledown (15 miles north-west).
Around Poulton
We visit homes around The Falcon pub and Church of St Michael and All Angels and the streets around them. Nearby you’ll also find Arlington Mill Museum (3.6 miles north) and South Cerney Castle (4 miles south-west).
Should you replace it?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Poulton
- Honest advice, even when it means no job
- One-year guarantee on every repair
- Rooms protected and left tidy
- CHAS, Constructionline and SafeContractor accredited
See our pricing or bath cost comparison.
What we cannot put right
It helps to know what we cannot do:
- Plumbing leaks, which need a plumber
- Problems we cannot see until an old finish comes off
- An acrylic bath that flexes badly underfoot
Send us photos and we will tell you honestly before booking.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
Towns and villages near Poulton
More services for Poulton
How the visit works
We agree an arrival time beforehand, so you’re not left guessing. On site, it takes a full day for most jobs. The room is left tidy and you’ll know when it can be used.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
How to prepare
- Avoid using the area for a few hours before we arrive
- Plan for the room to be out of bounds to pets and children
- Have a window or extractor fan available
Ask for a price
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Related advice
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Landlords, agents and businesses in Poulton
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Housing associations and facilities teams use us for planned and reactive repairs in Gloucestershire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Aftercare tips
A little care keeps the finish looking good. Our advice:
- Store bottles off the bath
- Have chips seen to early
- Respect the curing time we give you
- Avoid suction-cup mats
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
Poulton questions
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
What happens next?
We review the photos and send a fixed quote with dates.
How long does re-enamelling last?
Look after it and it lasts. Gentle cleaning, no suction mats.
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We’ll confirm timings when we quote.
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Gloucestershire.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we’ll take it from there.
About our accreditations · Every repair comes with a one-year guarantee.
