Stockton-on-Tees · England
Bath re-enamelling & resurfacing in Preston-on-Tees, Stockton-on-Tees
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Preston-on-Tees. Send pictures for a free, fixed quote.
- Resurfacing from £350
- An old resurfacing that’s failing
- Lots of chips and rust spots
Bath re-enamelling in Preston-on-Tees without replacing anything
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Our technicians work on Victorian roll-tops, pressed steel baths and acrylic baths, and people most often call us about stains that won’t shift and enamel that’s lost its shine and feels rough.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Preston-on-Tees (TS18)
- County
- Stockton-on-Tees
- Warranty
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
Nothing complicated is needed:
- A quick wipe after use keeps limescale away
- Don’t leave a chip unrepaired
- Never use suction bath mats
- Store bottles off the bath
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Preston-on-Tees: your questions answered
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do I need to be at home?
We need someone to let us in. You don’t need to watch us work.
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Do you resurface freestanding baths?
Yes. We can do the inside and outside.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we’re working in. We will tell you when the room can be used again.
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room masked and ventilated.
Do you cover the entire of Stockton-on-Tees?
We cover the whole UK, including Preston-on-Tees and the rest of Stockton-on-Tees. Send your postcode with your photos and we will offer you dates.
Places near Preston-on-Tees
Other services in Preston-on-Tees
Why repair rather than replace?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why us?
- One-year guarantee on every repair
- Colour mixed on the day to match
- No extra charge for your area
- No need to remove anything
See our pricing and bath cost comparison.
How the visit works
Arrival times are agreed in advance. Once we’re there, the work takes the best part of a day in most cases. We leave the room clean and ready to use once it has cured.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can usually be used the next day.
Getting ready for the visit
- Ensure the room can be ventilated
- Clear toiletries, mats and anything else from around the area
- Let us know if it has been repaired before
Get a quote
Email us pictures of the damage and one of the entire item, with your TS18 postcode, and we’ll come back with a fixed quote.
Related advice
What affects the price in Preston-on-Tees
Resurfacing from £350. There’s no charge for travel to Preston-on-Tees. The price depends on:
- The colour and finish to match
- The size and number of damaged areas
- Where the damage is and how we get to it
- What kind of damage it is
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
Getting a price from photos
We price nearly every job from photos. This is what to send:
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Can I fix it myself?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Honest limits
Not everything can be repaired, and we would rather say so up front. We cannot fix:
- Plumbing leaks, which need a plumber
- Damage hidden under a previous coating, until it’s stripped back
- A metal bath with a through crack
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
Landlord and trade work in Preston-on-Tees
Landlords, letting agents and housing providers in Preston-on-Tees use us as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
We regularly work with letting and managing agents. Send the address, pictures and access details and we will handle the rest.
Where we work around Preston-on-Tees
Preston-on-Tees is about 2 miles west of Thornaby-on-Tees, in Stockton-on-Tees. Jobs in Preston-on-Tees are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. Preston-on-Tees is one of 31 towns and villages in Stockton-on-Tees where we work. You can also see our page for Newcastle upon Tyne, about 33 miles away.
Every address in TS18 is within our area. If you are just outside Preston-on-Tees, we cover Bowesfield (1 mile north), Hartburn (1 mile north), Egglescliffe (1 mile south-west), Eaglescliffe (1 mile south-west) and Oxbridge (2 miles north). Within a short drive, we also cover Billingham (5 miles north), Yarm (3 miles south), Elm Tree Farm (3 miles north), Wynyard (7 miles north), Hardwick (3 miles north) and Roseworth (3 miles north).
Near you in Preston-on-Tees
Typical jobs here are in homes near Teesside High School, Preston Park and All Saints and the streets around them. The closest station to Preston-on-Tees is Eaglescliffe station, about 0.9 miles south-west of the centre. Nearby you’ll also find University Hospital of North Tees (3.1 miles north) and Green Dragon Museum (1.9 miles north-east).
About our accreditations · Every repair comes with a one-year guarantee.
