Bridgend · Wales
Bath re-enamelling & resurfacing in Price Town, Bridgend
Fixed-price bath re-enamelling in Price Town and the surrounding area, usually in one visit.
- Resurfacing from £350
- A roll-top that is seen better days
- A bath in a colour that no longer suits
Bath re-enamelling in Price Town, done in place
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. We’re frequently asked to fix staining under the taps and around the waste and an old resurfacing that’s failing, in pressed steel baths, basins & shower trays and cast iron baths.
All our work comes with a one-year guarantee, wherever you are in Bridgend.
- Location
- Price Town (CF32)
- County
- Bridgend
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Nearby places to Price Town
Also in Price Town
How to look after the repair
Simple care helps the repair last. We recommend:
- Respect the curing time we give you
- Don’t leave bottles, razors or sponges standing on the surface
- Get any chip repaired quickly
- Wipe the bath dry after use in hard water areas
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
What bath re-enamelling costs
Prices start from £350. There’s no charge for travel to Price Town. The price depends on:
- How hard the colour is to match
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
- How much damage there is
There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
Good pictures mean an accurate price. Here’s what we find most useful:
- A coin or ruler next to the damage for scale
- Natural light rather than flash
- A close-up of the damage, in focus
- What it’s made of, if you know
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed quote back. Quotes are free and you are under no obligation.
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
What happens on the day
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. Most jobs take a full day, and you are welcome to carry on with your day while we work.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Have somewhere for us to park nearby if possible
- Ensure the area is dry
Ask for a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Advice
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
Repairing versus replacing in Price Town
Replacing a bath can take several days across several trades. Resurfacing takes one technician and typically a day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not where you live. You will see the full price before booking.
Why book with us
- One-year guarantee on every repair
- Colour mixed on the day to match
- We leave the room as we found it
- Everything repaired in place
See our pricing or guide to resurfacing and replacement costs.
Do you need bath re-enamelling in Price Town?
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Signs it’s time to call us include:
- A coloured bath you want in white
- Thin, worn enamel in places
- A bath that stays dull however much you clean it
- Staining under the taps and around the waste
What your quote should include
- What happens if they find more damage
- Whether the price covers travel
- How to care for the finish
- Whether they match the colour on site
Common questions in Price Town
Is repairing better than replacing?
Usually, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
How quickly can you book me in?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Is there a call-out fee?
There is no separate call-out charge. Your fixed price includes everything.
Can I add another job to the visit?
Of course, and it typically saves money. Send pictures of everything together and we’ll quote them together.
Is there a guarantee?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Price Town and the surrounding area
Price Town is about 3 miles south-west of Rhondda, in Bridgend. Jobs in Price Town are booked in like any other job: a fixed price from your pictures, then a visit to do the work. We cover all 91 towns and villages in Bridgend, from the larger towns to small villages.
We cover every part of the CF32 postcode area and the streets around it. Local streets include Ogwy Street, Oakfield Terrace and Aberfields View, all of which we cover. We also cover the places around Price Town: Nant-y-moel (1 mile north), Wyndham (1 mile south-west), Ogmore Vale (1 mile south), Pontycymer (2 miles west) and Blaengarw (2 miles west). We also work in nearby towns such as Bridgend (8 miles south), Maesteg (5 miles west), Porthcawl (12 miles south-west), Newcastle Higher (8 miles south), Ynysawdre (5 miles south-west) and Pencoed (6 miles south).
What’s near Price Town
Our customers here include homes close to Nantymoel Primary School, St David's Church and The Blaenogwr pub and the streets around them. The closest station to Price Town is Ton Pentre station, roughly 3 miles north-east. Other landmarks nearby include Llwynypia Hospital (4 miles east) and Moel Garn (1.5 miles west). The countryside around Price Town includes Ferndale Lake and Mynydd Ton.
About our accreditations · Every repair comes with a one-year guarantee.
