Bridgend · Wales
Bath re-enamelling & resurfacing in Ogmore Vale, Bridgend
Bath re-enamelling in Ogmore Vale without the cost of replacing. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- Stains that will not shift
- An original cast iron bath that needs restoring
What we can’t put right
Some jobs are not right for a repair, including:
- A cast iron or steel bath that’s cracked right through
- An acrylic bath that flexes badly underfoot
- Leaks from fittings rather than the bath
Send us pictures and we’ll tell you honestly.
Materials we work on in Ogmore Vale
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
Bath re-enamelling in Ogmore Vale without replacing anything
We do not move the bath, so the taps, tiles and plumbing aren’t touched. It typically takes one visit, and can be used again the day after. Common call-outs are for worn patches where water runs and sits and staining under the taps and around the waste, across cast iron baths, acrylic baths and pressed steel baths.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Area
- Ogmore Vale (CF32)
- Area hub
- Bridgend
- Cover
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How to care for the repair
How the surface is treated afterwards matters:
- Fix dripping taps quickly
- Have chips seen to early
- A quick wipe after use keeps limescale away
- Respect the curing time we give you
Use mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Landlords, agents and businesses in Ogmore Vale
If you manage property in Ogmore Vale, we will quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- Whether it’s a chip, crack, burn or wear
- Access to the area
- The colour and finish to match
- Whether old repairs or coatings need taking off
We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
You can take the pictures on your phone. Make sure they show:
- One picture of the whole bath
- One sharp close-up of the damage
- Details of any past repairs
- Any details about the material
To get a price, send two or three photos using our quote form or call us. We will say right away if a repair is the right fix.
Should you replace it?
Replacing a bath typically involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. A repair normally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
What you get with us
- One price list for the whole UK
- CHAS and Constructionline accredited
- Every repair guaranteed for a year
- Colour mixed on the day to match
Take a look at our full price list or bath cost comparison.
Nearby places to Ogmore Vale
Also in Ogmore Vale
Where we work around Ogmore Vale
Ogmore Vale (Welsh: Cwm Ogwr) is about 4 miles south-west of Rhondda, in Bridgend. Whether you are in the middle of Ogmore Vale or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Ogmore Vale is one of 91 towns and villages in Bridgend where we work.
Our technicians cover all of the CF32 postcode area. Whether you live on High Street, Railway Terrace and Blandy Terrace or anywhere nearby, we can come to you. Other places close to Ogmore Vale include Wyndham (1 mile north), Price Town (1 mile north), Nant-y-moel (2 miles north), Pontycymer (2 miles north-west) and Blaengarw (3 miles north-west). We also work in nearby towns such as Bridgend (6 miles south), Maesteg (5 miles west), Porthcawl (11 miles south-west), Newcastle Higher (7 miles south), Ynysawdre (4 miles south-west) and Pencoed (5 miles south).
Around Ogmore Vale
In Ogmore Vale, that means homes near Ogmore Vale Primary, Fox & Hounds pub and St David's Church, among other places. For rail, the closest station is Ton Pentre station, roughly 4.1 miles north-east. Well-known places in the area include Llwynypia Hospital (4.8 miles north-east) and Moel Garn (1.4 miles north-west). Open spaces near Ogmore Vale include Pant Blaenhirwr.
Your questions about bath re-enamelling in Ogmore Vale
Will the bath be moved?
Not at all. We work on the bath in place, with the room masked and ventilated.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
How long does re-enamelling take?
One day for most baths, ready the following day. We’ll confirm timings when we quote.
Is there any odour?
There may be a mild smell during the work.
What happens after I send photos?
You’ll get a fixed quote back. There’s no obligation to book.
Can you repair several things at once?
Yes, and it’s often cheaper. Send pictures of everything together and you’ll get one combined price.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
When to call us in Ogmore Vale
A dull surface stains and holds dirt, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
It’s worth getting a quote if you see:
- Lots of chips and rust spots
- Thin, worn enamel in places
- A coloured bath you want in white
- Staining under the taps and around the waste
What your quote should include
- What preparation is included
- Who will actually do the work
- Whether there are any call-out or travel charges
- How the colour is matched
How it works
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take the best part of a day. We tidy up before we leave and tell you when it’s ready to use.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Let us know if it has been repaired before
- Keep children and pets away from the room on the day
- Let us know which floor the room is on
Ask for a price
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
