Bridgend · Wales
Bath re-enamelling & resurfacing in Wyndham, Bridgend
Bath re-enamelling in Wyndham without the cost of replacing. Get a fixed quote from your pictures, then book a visit.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A roll-top that’s seen better days
What we are called out for in Wyndham
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Common reasons people in Wyndham contact us are:
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
- An outdated colour you’d like to change
- Stains that will not shift
What to look for in a quote
- How to look after the finish
- Whether a trained technician does the job
- Whether cleaning and preparation are in the price
- How the colour is matched
How we handle bath re-enamelling in Wyndham
We don’t move the bath, so the taps, tiles and plumbing are not touched. It usually takes one visit, with the bath ready to use the following day. Common call-outs are for a coloured bath you want in white and worn patches where water runs and sits, across pressed steel baths, acrylic baths and cast iron baths.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Where
- Wyndham (CF32)
- Area hub
- Bridgend
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Prices start from £350. We charge the same wherever you are, with no extra for Wyndham. The job itself decides the price: how much damage, what it’s made of and how many items.
Why choose Surface Doctor in Wyndham
- One price list for the entire UK
- Most jobs done in one visit
- Rooms protected and left tidy
- Colours mixed by hand to suit your surface
See our prices page and bath cost comparison.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
How it works
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and tidy away. Plan for most of the day. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
How to prepare
- Have somewhere for us to park nearby if possible
- Mention if the room is upstairs or in a flat
- Mention any parking restrictions or tricky access
How to get a price
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Read more
Places near Wyndham
Other services in Wyndham
Looking after it afterwards
Looking after the surface is easy:
- Dry the bath after use to stop limescale
- Fix dripping taps quickly
- Don’t use the bath until it has fully cured
- Don’t leave a chip unrepaired
Dry the bath after use if possible, and rinse off any bath products.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Wyndham questions
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you work in Wyndham?
Yes, we do. Repair technicians travel to Wyndham from across the region, and the price is the same as everywhere else.
Do you cover the whole of Bridgend?
All of Bridgend, and the rest of the UK. Travel is included in the price.
Is there a smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Is there any odour?
Some materials have a smell while they’re applied. It clears as the materials cure.
How durable is a resurfaced bath?
Look after it and it lasts. Gentle cleaning, no suction mats.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
When a repair isn’t the answer
Not everything can be repaired, and we would rather say so up front. Repairs will not solve:
- Holes rusted through the metal
- Damage hidden under a previous coating, until it’s stripped back
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
About Wyndham
Wyndham is about 3 miles south-west of Rhondda, in Bridgend. Customers in Wyndham get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Our repair technicians cover all 91 towns and villages in Bridgend, from the larger towns to small villages.
All of CF32 is within our area. You will find streets such as Dunraven Place, Fairy Glen and Adare Street, all of which we cover. Other places close to Wyndham include Price Town (1 mile north-east), Nant-y-moel (1 mile north), Ogmore Vale (1 mile south), Pontycymer (2 miles west) and Blaengarw (2 miles north-west). Within a short drive, we also cover Bridgend (7 miles south), Maesteg (5 miles west), Porthcawl (11 miles south-west), Newcastle Higher (8 miles south), Ynysawdre (5 miles south-west) and Pencoed (6 miles south).
Local landmarks in Wyndham
We visit homes around The Wyndham pub, Ogmore Vale Primary and St David's Church. The nearest railway station is Ton Pentre station, roughly 3.5 miles north-east. Well-known places in the area include Moel Garn (1.1 miles west) and Llwynypia Hospital (4.4 miles east). For a walk, there is Pant Blaenhirwr.
About our accreditations · Every repair comes with a one-year guarantee.
