Devon · England
Bath re-enamelling & resurfacing in Putsborough, Devon
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Putsborough. Send pictures for a free, fixed quote.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Thin, worn enamel in places
Prices and what affects them
Resurfacing from £350. We charge the same across the UK, including Putsborough. The price reflects:
- How hard the colour is to match
- Doing more than one item at once
- The size and number of damaged areas
- Any earlier repairs that need removing first
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from pictures
You can take the photos on your phone, there is no need for anything special. Just make sure we can see:
- One sharp close-up of the damage
- Whether it’s been repaired or coated before
- The material, if you know it
- Something in shot to show the size
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Bath re-enamelling at your home in Putsborough
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Common call-outs are for a bath in a colour that no longer suits and thin, worn enamel in places, across acrylic baths, pressed steel baths and cast iron baths.
A one-year guarantee comes as standard, so you’re not left on your own once we’ve gone.
- Where
- Putsborough (EX33)
- County
- Devon
- Warranty
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which generally takes most of the day. If anything looks different from your pictures, we will talk to you before going ahead.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Keep children and pets away from the room on the day
- Let us know about parking or access
How to get a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Read more
Our work in Putsborough
Putsborough is about 4 miles north-west of Braunton, in Devon. Wherever you are in the EX33 postcode area, a technician comes to you. Putsborough is one of 586 towns and villages in Devon we cover.
Our visits in EX33 work the same way as everywhere else we cover. We also travel to Cross (1 mile south), Croyde (1 mile south), Georgeham (1 mile south-east), Darracott (2 miles south-east) and Woolacombe (2 miles north-east). We also work in nearby towns such as Barnstaple (9 miles south-east), Bideford (9 miles south), Ilfracombe (6 miles north-east), Braunton (4 miles south-east), Newport (9 miles south-east) and Roundswell (8 miles south-east).
Local landmarks in Putsborough
Our clients here include homes close to Church of St Mary Magdalene. A little further out are Mortehoe Museum (2.6 miles north). Not far away are Braunton Burrows and Chapel wood.
When to call us in Putsborough
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
Contact us if you’ve noticed any of these:
- A period or roll-top bath worth keeping
- Several chips and rust patches
- An old resurfacing that is failing
- Brown or grey marks that don’t clean off
What to look for in a quote
- Whether the price covers travel
- How to look after the finish
- How long it needs to cure
- Whether the colour is mixed to match
Also near Putsborough
More services for Putsborough
Keeping it looking good
Looking after the surface is easy, and it makes a real difference:
- Keep suction mats out of the bath
- A dripping tap should be fixed promptly
- Dry the bath after use to stop limescale
- Have chips seen to early
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Landlord and trade work in Putsborough
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Putsborough questions
Do you resurface freestanding baths?
Yes. We can do the inside and outside.
Does someone need to be in?
We need someone to let us in. You do not need to watch us work.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Do you work in Putsborough?
Yes. We cover the entire UK and travel to Putsborough. Send us photos for a fixed quote, or call 0345 017 0787.
Are there extra charges for Putsborough?
Travel is included in the price, with the same prices everywhere we work.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
What we can’t put right
To be straight with you, there are a few things a repair won’t fix:
- Damage hidden under a previous coating, until it’s stripped back
- An acrylic bath that flexes badly underfoot
- Steel that has corroded right through
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
Why repair rather than replace?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, so there is no premium for Putsborough. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why book with us
- Fixed prices from your pictures
- One price list for the whole UK
- Straight answers about what a repair can do
- Nothing taken out or refitted
Read our pricing or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
