Norfolk · England
Bath re-enamelling & resurfacing in Queen's Hills, Norfolk
Fixed-price bath re-enamelling in Queen's Hills and the surrounding area, usually in one visit.
- Resurfacing from £350
- Worn patches where water runs and sits
- A coloured bath you want in white
Bath re-enamelling in Queen's Hills, done in place
If your bath is sound but looks tired, re-enamelling is typically the most cost-effective option. There’s no removal, plumbing or tiling involved. Whether it’s a peeling or bubbling previous coating and a coloured bath you want in white, we can normally put it right, on acrylic baths, basins & shower trays and Victorian roll-tops alike.
You get a one-year guarantee, the same in Queen's Hills as everywhere else we work.
- Location
- Queen's Hills (NR8)
- County
- Norfolk
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
What we do, step by step
Here’s how a visit usually runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Allow most of the day from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Tell us about any previous repairs or coatings
- Mention any parking restrictions or tricky access
- Plan for the room to be out of bounds to pets and children
Get a quote
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Related advice
What a repair can’t fix
We’d rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- Problems we can’t see until an old finish comes off
- Holes rusted through the metal
- Leaks from fittings rather than the bath
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we work on in Queen's Hills
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
How to look after the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Use washing-up liquid and a soft cloth
- Dry the bath after use to stop limescale
- Wash away dyes and oils after use
- Get any chip repaired quickly
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Your questions about bath re-enamelling in Queen's Hills
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and we’ll quote them together.
Can you redo someone else’s repair?
Normally, yes. We remove the old repair before doing a new one, so mention it when you send photos.
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
What information do you need?
Send photos through the quote form or call 0345 017 0787, and we will do the rest.
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Queen's Hills and nearby
Queen's Hills is about 5 miles west of Norwich, in Norfolk. Book a date that suits you, and we’ll give you an arrival time in advance, so there’s no waiting around. We work in 797 places in Norfolk, from the larger towns to small villages.
Postcode districts we cover here: NR8. From Robin Close, Magpie Close and Fieldfare Way or a nearby road, a technician can come to you. Other places close to Queen's Hills include Easton (1 mile south-west), Lower Easton (1 mile west), Ringland (1 mile north-west), Bawburgh (2 miles south) and Marlingford (2 miles south-west). Within a short drive, we also cover Norwich (5 miles east), Dereham (10 miles west), Wymondham (7 miles south), Sprowston (6 miles east), Thorpe St Andrew (7 miles east) and Attleborough (13 miles south-west).
Near you in Queen's Hills
Our customers here include homes close to Parish Church of St Edmund, Taverham Hall School and Queen's Hill Primary School and the streets around them. A little further out are Hellesdon Hospital (2.9 miles east) and Costessey Hall (0.8 miles south-east). Not far away are Wensum Local Nature Reserve.
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Repairing versus replacing in Queen's Hills
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Why us?
- Nothing taken out or refitted
- A fixed quote before you book
- Same prices wherever you are
- Colour-matched on site
Take a look at our full price list and guide to resurfacing and replacement costs.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Prices and what affects them
Resurfacing from £350. Each job gets its own fixed quote. These are the things that affect it:
- How much damage there is
- What kind of damage it is
- Whether we combine several jobs
- The colour and finish to match
Set against the cost of replacement, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Quotes from your pictures
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- A picture taken from further back
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Towns and villages near Queen's Hills
More services for Queen's Hills
About our accreditations · Every repair comes with a one-year guarantee.
