Norfolk · England

Bath Resealing in Queen's Hills

We travel to Queen's Hills for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, with a one-year guarantee.

  • Silicone smeared on tiles
  • Stained silicone
  • Silicone coming away from the tiles
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Queen's Hills

Bath resealing in Queen's Hills, done in place

We cut out all of the old sealant, treat any mould, and apply fresh mould-resistant silicone. We reseal baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. Common call-outs are for discoloured, yellow sealant and water getting behind the bath or tray, in shower trays & enclosures, baths and kitchen worktops & sinks.

Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.

Area
Queen's Hills (NR8)
County
Norfolk
Cover
12 months on all our work
Quote
Free, fixed price from pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

What your bath or shower is made of matters

Shower trays

Trays are sealed with weight on them, for the same reason.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

Should I try a DIY kit first?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

Looking after it afterwards

Once the work has cured, treat it gently:

  • Run the extractor fan during and after showers
  • Reseal when black spots won’t clean off
  • Dry the seal after bathing
  • Do not stand toiletries on the seal

Keep the room well ventilated, and dry the joints after bathing to keep mould away.

Black mould in sealant isn’t just unsightly, it’s a sign moisture is sitting in the joint. Resealing early keeps water out of the walls and floor.

When we would advise against a repair

In fairness, some problems need a different fix:

  • Water damage behind the bath that needs a builder
  • Tiles that move, until they’re refixed
  • Gaps too big for silicone alone

Send us photos and we will tell you honestly before booking.

Surfaces we repair

  • Baths
  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Basins & vanity units
  • Wet rooms

Queen's Hills: your questions answered

Do you work for landlords and businesses?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

What happens once I’ve sent pictures?

We review the photos and send a fixed quote with dates.

How do I book?

A close-up, a wider photo and your postcode. Then we’ll agree a date.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.

I’m a tenant. Can you help?

Of course. Check with your landlord; we can send the quote to them too.

What if the damage is worse than the photos show?

If we find something the photos didn’t show, we explain it first. The price only changes if you agree.

How do I stop mould in sealant?

Usually poor ventilation and moisture sitting on the joint. Mould-resistant silicone and good ventilation help.

Can I get a quote without a visit?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

Do you need bath resealing in Queen's Hills?

Most reseals are because of black mould. It grows into the silicone, so cleaning only removes the surface.

Clients generally contact us about:

  • Damp near the bath
  • Mould you cannot clean out
  • Gaps by the taps
  • A messy previous reseal

Comparing quotes

  • What prep work is covered
  • How the room is protected while they work
  • How the colour is matched
  • Aftercare advice

Choosing a repair company

Landlord and trade work in Queen's Hills

We are used to working with agents and managing companies. Just send pictures, the address and how to get access.

If you manage property in Queen's Hills, we’ll quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.

How we price bath resealing

There’s no charge for travel to Queen's Hills. The price depends on:

  • How hard the colour is to match
  • Whether it’s a chip, crack, burn or wear
  • How many areas need work
  • Access to the area

The price reflects the work involved, not your postcode. You will see the full price before you book, with nothing added on the day.

Getting a price from pictures

Most quotes are done from photos alone. To make it quick:

  • Details of any past repairs
  • A close-up of the damage, in focus
  • Something in shot to show the size
  • A picture taken from further back

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath or shower, we can give you a fixed price the same day in most cases.

What we do, step by step

We work cleanly and quietly, so you can stay at home while we’re there. Protection goes down first, then the job itself takes around two hours. At the end we talk you through how soon it can be used and how to care for it.

  1. We protect the area and mask the joint lines.
  2. Old sealant and residue are removed.
  3. We clean, treat and dry the joint.
  4. We run a continuous bead of new silicone.
  5. We smooth the bead, remove the tape and leave it to cure.

How to prepare

  • Ensure the area is dry
  • Let us know about parking or access
  • Keep children and pets away from the room on the day

Get a quote

We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.

Get a free quote

Read more

About Queen's Hills

Queen's Hills is about 5 miles west of Norwich, in Norfolk. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in all 797 towns and villages in Norfolk.

Our technicians cover all of the NR8 postcode area. From Robin Close, Magpie Close and Fieldfare Way or a nearby road, we can come to you. Close by, we cover Easton (1 mile south-west), Lower Easton (1 mile west), Ringland (1 mile north-west), Bawburgh (2 miles south) and Marlingford (2 miles south-west). Further out, we also cover Norwich (5 miles east), Dereham (10 miles west), Wymondham (7 miles south), Sprowston (6 miles east), Thorpe St Andrew (7 miles east) and Attleborough (13 miles south-west).

Local landmarks in Queen's Hills

In Queen's Hills, that means homes near Parish Church of St Edmund, Taverham Hall School and Queen's Hill Primary School, among other places. Nearby you will also find Hellesdon Hospital (2.9 miles east) and Costessey Hall (0.8 miles south-east). Not far away are Wensum Local Nature Reserve.

Map of Queen's Hills © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.