North Yorkshire · England
Bath Re-enamelling in Redmire
Bath re-enamelling in Redmire without the cost of replacing. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- Wear marks under the taps
- Enamel that is lost its shine and feels rough
Repair or replace in Redmire?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking.
Why Redmire clients choose us
- CHAS, Constructionline and SafeContractor accredited
- No need to remove anything
- Repair technicians who travel to you, UK-wide
- Rooms protected and left tidy
See our prices page or guide to resurfacing and replacement costs.
About our bath re-enamelling in Redmire
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. Common call-outs are for a bath that stays dull however much you clean it and wear marks under the taps, on pressed steel baths, Victorian roll-tops and basins & shower trays.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll come back.
- Location
- Redmire (DL8)
- Region
- North Yorkshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
FAQs for Redmire
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
How do I get a price for bath re-enamelling in Redmire?
Prices start from £350. We give a fixed price from your photos. Send a close-up and a photo of the entire item with your DL8 postcode.
Do you resurface freestanding baths?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Are there extra charges for Redmire?
There is no separate call-out charge. Your fixed price includes everything.
Do you need bath re-enamelling in Redmire?
Frequently the bath has just had decades of use, and only the surface is worn. The body of the bath is typically perfectly sound.
Typical reasons for a call-out include:
- A coloured bath you want in white
- Wear marks under the taps
- A roll-top that’s seen better days
- Stains that won’t shift
Comparing quotes
- What happens if the damage is worse than the photos show
- How the colour is matched
- When it can be used again
- Whether there are any call-out or travel charges
Places near Redmire
More services for Redmire
When we would advise against a repair
Some jobs are not right for a repair, for example:
- Plumbing leaks, which need a plumber
- Problems we can’t see until an old finish comes off
- Holes rusted through the metal
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
Landlords, agents and businesses in Redmire
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll handle the rest.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Redmire and nearby
Redmire is about 10 miles south-west of Catterick Garrison, in North Yorkshire. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Our technicians cover 626 places in North Yorkshire. Our jobs stretch from Redmire to Leeds (about 38 miles away).
Postcode districts we cover here: DL8. That includes homes on Briar Close, Church Lane and Hargill Lane and the roads around them. Neighbouring places we cover include Thoresby (1 mile south-west), Swinithwaite (1 mile south), Preston-under-Scar (1 mile east), West Witton (2 miles south-east) and Aysgarth (3 miles south-west). Further out, we also cover Catterick Garrison (10 miles north-east), Richmond (10 miles north-east), Colburn (11 miles north-east), Bedale (14 miles east), Aiskew (14 miles east) and Catterick (13 miles east).
Landmarks near Redmire
Around Redmire, we work in homes near St Mary's Church and The Swan pub, among other places. Further afield, we also cover the area around Bolton Castle (1 mile north-west) and Yorkshire Museum of Carriages and Horse Drawn Vehicles (2.7 miles south-west). Not far away are Leyburn Old Glebe and Penhill.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes the best part of a day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
Before we arrive
- Ensure the area is dry
- Clear toiletries, mats and anything else from around the area
- Let us know if it has been repaired before
Getting a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Read more
What bath re-enamelling costs
Prices start from £350. We do not charge extra for travel to Redmire. The price depends on:
- Access to the area
- The material
- Any earlier repairs that need removing first
- The colour and finish to match
Set against the cost of replacement, repairing typically costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed price
You can take the pictures on your phone, there is no need for anything special. Just ensure we can see:
- A close-up of the damage, in focus
- A picture taken from further back
- Whether it’s been repaired or coated before
- Any details about the material
Email us a picture of the damage and one of the entire item, with your DL8 postcode, and we’ll reply with a fixed price.
About our accreditations · Every repair comes with a one-year guarantee.
