Devon · England
Bath re-enamelling & resurfacing in Rewe, Devon
Bath re-enamelling in Rewe without the cost of replacing. Get a fixed quote from your pictures, then book a visit.
- Resurfacing from £350
- Several chips and rust patches
- A dull, rough surface that will not come clean
How we handle bath re-enamelling in Rewe
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, and can be used again the next day. Common call-outs are for an old resurfacing that’s failing and wear marks under the taps, in cast iron baths, acrylic baths and Victorian roll-tops.
All our work is covered by a one-year guarantee, wherever you are in Devon.
- Location
- Rewe (EX5)
- Region
- Devon
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
When to call us in Rewe
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
Send us a photo if you notice any of these:
- A bath that stays dull however much you clean it
- Wear marks under the taps
- An outdated colour you’d like to change
- Lots of chips and rust spots
Before you book anyone
- What happens if they find more damage
- What the guarantee covers, and for how long
- Whether there are any call-out or travel charges
- How the room is protected while they work
Questions from Rewe
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Are there extra charges for Rewe?
We do not add a call-out fee. The fixed quote covers the visit and the work.
How quickly can you book me in?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
Do the materials smell?
Expect a mild smell while we are working, which fades afterwards.
Do you resurface freestanding baths?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
How the visit works
We agree an arrival time beforehand, so you know when to expect us. Once we’re there, the work takes a full day. The room is left tidy and you will know when it can be used.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the following day.
Before we arrive
- Keep pets and children out of the room while we work
- Ensure the room can be ventilated
- Mention any earlier repairs or resurfacing
Ask for a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Related advice
Where we work around Rewe
Rewe is about 5 miles north of Exeter, in Devon. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in 586 places across Devon.
All of EX5 is within our area, from the main roads to the quietest streets. Neighbouring places we cover include Poltimore (2 miles south-east), Broadclyst (3 miles south-east), West Clyst (3 miles south-east), Pinhoe (3 miles south) and Monkerton (4 miles south). Larger places within reach include Exeter (5 miles south), Exmouth (12 miles south), Tiverton (8 miles north), Sidmouth (13 miles south-east), Honiton (13 miles east) and Dawlish (14 miles south).
Near you in Rewe
In Rewe, that means homes near The Parish Church of St Mary and Stoke Canon Church of England Primary School and Pre-School, among other places. Rewe’s nearest station is Pinhoe station, roughly 3.6 miles south. Nearby you will also find Danes Castle (4.3 miles south) and Honeylands (3.9 miles south). Green spaces nearby include Raddon Top.
Landlord and trade work in Rewe
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
For anyone letting property in or around Rewe, we can repair and quote for several addresses together. Send photos for each one and we will price them together.
Repairing versus replacing in Rewe
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing typically wins. Resurfacing from £350, with every job priced individually. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Why Rewe clients choose us
- One-year guarantee on every repair
- CHAS, Constructionline and SafeContractor accredited
- Most jobs done in one visit
- No need to remove anything
See our prices page and bath cost comparison.
Towns and villages near Rewe
Also in Rewe
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
What affects the price in Rewe
Prices start from £350. We charge the same across the UK, including Rewe. What changes the price is:
- The material
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
- Access to the area
Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
How to get a fixed price
Almost every job we do is priced from pictures. This is what we need:
- The material, if you know it
- Your postcode, so we can check dates
- A wider photo showing the whole bath
- Details of any past repairs
If you’re in Rewe and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
When a repair is not the answer
We won’t take on work that will not last, so these are the limits:
- A bath that is rusted through
- Problems we can’t see until an old finish comes off
- Acrylic that moves when you stand in it
Send us pictures and we’ll tell you honestly before you book.
Materials we work on in Rewe
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
