Liverpool · England

Bath Re-enamelling in Rock Ferry

Local bath re-enamelling for Rock Ferry: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • A coloured bath you want in white
  • Stains that will not shift
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Rock Ferry

Honest limits

We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:

  • Leaks from fittings rather than the bath
  • An acrylic bath that flexes badly underfoot
  • Holes rusted through the metal

Send us photos and we’ll tell you honestly.

What we work on

  • Cast iron baths
  • Basins & shower trays
  • Pressed steel baths
  • Victorian roll-tops
  • Acrylic baths

Bath re-enamelling in Rock Ferry without replacing anything

If your bath is sound but looks tired, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. Whether it’s a period or roll-top bath worth keeping and several chips and rust patches, we can help, whatever the material.

The work is covered for a year after we finish. Just call us if there’s a problem and we’ll come back.

Roll-top bath being refinished by a Surface Doctor technician
Location
Rock Ferry (CH42, CH62, CH41)
County
Liverpool
Guarantee
One year on every repair
Quotes
From £350. Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026

Our work in Rock Ferry

Rock Ferry is about 2 miles south-east of Birkenhead, in Liverpool. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Rock Ferry is one of 52 places in Liverpool where we work.

Every address in CH42, CH62 and CH41 is covered. Whether you live on Well Lane, Park Road and Grove Road or a nearby road, a technician can come to you. If you’re just outside Rock Ferry, we cover Tranmere (1 mile north-west), Woodside (1 mile north), Lower Bebington (2 miles south), Higher Bebington (2 miles south-west) and Birkenhead (2 miles north-west). Larger places within reach include Liverpool (4 miles north-east), Crosby (8 miles north), Everton (4 miles north-east), Orrell (7 miles north), Brighton-le-Sands (8 miles north) and Wavertree (4 miles north-east).

Near you in Rock Ferry

Typical jobs here are in homes near Church of St Paul with St Luke, Dock Branch Park and The Bedford pub and the streets around them. Other local landmarks include Rock Ferry High School (0.6 miles south), Rock Ferry Primary School (less than half a mile north-west) and Wellington School (1.2 miles south). There’s a railway station in Rock Ferry itself: Rock Ferry station. Well-known places in the area include Liverpool One (2.3 miles north-east) and Wirral Museum (1.3 miles north). For a walk, there’s New Ferry Butterfly Park and Princes Park lake.

  • Other local spots include Municipal Borough of Bebington (1.6 miles south)
Map of Rock Ferry © OpenStreetMap contributors

When to call us in Rock Ferry

The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.

Send us a picture if you notice any of these:

  • Wear marks under the taps
  • Lots of chips and rust spots
  • An old resurfacing that’s failing
  • A bath that stays dull however much you clean it

Questions to ask before booking

  • What aftercare is recommended
  • Whether a trained technician does the job
  • When it can be used again
  • The length of the guarantee and what it covers

Our hiring checklist

Aftercare tips

Looking after the surface is easy:

  • Respect the curing time we give you
  • Wipe the bath dry after use in hard water areas
  • Don’t leave a chip unrepaired
  • Wash away dyes and oils after use

Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.

Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.

Materials and what they mean for the repair

Pressed steel

Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

What happens on the day

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes the best part of a day. If we find something your pictures didn’t show, we will explain it before carrying on.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. We degrease the bath, fix any damage and key the surface.
  4. We apply the primer and then the finish coats.
  5. The masking comes off, we tidy up and tell you when it can be used.

Getting ready for the visit

  • Clear the area around the damage
  • Make sure the area is dry
  • Keep a parking space free if you can

How to get a price

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.

Get a fixed quote

Read more

Should you replace it?

When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.

Why us?

  • Honest advice, even when it means no job
  • Rooms protected and left tidy
  • Work done at your home or business
  • CHAS and Constructionline accredited

See our pricing and guide to resurfacing and replacement costs.

DIY kit or professional repair?

If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

Questions from Rock Ferry

Can landlords book you?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.

How do I book?

Just photos, your postcode and a contact number. On the day, we only need access to the room.

Do you work in Rock Ferry?

Yes. We work across the UK and come to Rock Ferry and the rest of Liverpool. Send pictures and we’ll quote, or call 0345 017 0787.

Can tenants book a repair?

Yes. Ask your landlord first, and we can send them the quote if that helps.

Does re-enamelling smell?

A little, during the work. We set up ventilation and the smell fades as it cures.

Will it make a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Can you change the colour of my bath?

Yes, white is the usual choice. Mention the colour you want when you send pictures.

Does the bath have to be removed?

Not at all. Everything is done in your bathroom, with the room masked and ventilated.

Landlord and trade work in Rock Ferry

We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll handle the rest.

For anyone letting property in or around Rock Ferry, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.