Liverpool · England

Bath re-enamelling & resurfacing in Brighton-le-Sands, Liverpool

Full bath re-enamelling and resurfacing for householders, landlords and businesses in Brighton-le-Sands. Send photos for a free, fixed quote.

  • Resurfacing from £350
  • An old resurfacing that’s failing
  • Chips and rust in more than one place
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Brighton-le-Sands

How we handle bath re-enamelling in Brighton-le-Sands

Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the whole bath is tired rather than one spot. Whether it’s an original cast iron bath that needs restoring and staining under the taps and around the waste, we can usually put it right, whatever the material.

Big or small, it’s backed by a one-year guarantee.

Technician in a mask working on a freestanding roll-top bath
Location
Brighton-le-Sands (L23, L22)
Region
Liverpool
Guarantee
12 months on all our work
Price
From £350. Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026

What happens on the day

You don’t need to empty the room. We bring everything we need with us, put protection down and start once you are happy with the plan. It usually takes the best part of a day, and you can get on with other things while we are there.

  1. The room is masked, protected and ventilated.
  2. Next we degrease the bath and fix chips and rust spots.
  3. We key the surface and put on a bonding primer.
  4. Several coats of new finish are sprayed on.
  5. Once cured, normally by the following day, the bath is ready.

Getting ready for the visit

  • Let the surface dry out before the visit
  • Mention if the room is upstairs or in a flat
  • Plan for the room to be out of bounds to pets and children

Getting a price

If you’re in Brighton-le-Sands and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

Get a free quote

Advice

Where we work around Brighton-le-Sands

Brighton-le-Sands is about 1 mile south-west of Crosby, in Liverpool. We travel to customers in Brighton-le-Sands, so nothing has to leave your home. Brighton-le-Sands is one of 52 places in Liverpool we cover. We work right across the region, from Brighton-le-Sands to Liverpool (about 7 miles away).

Jobs in L23 and L22 work the same way as everywhere else we cover. Local streets include Fir Road, Argo Road and Hyde Road. Brighton-le-Sands sits on or near the A565, so getting to you is simple. We also cover the places around Brighton-le-Sands: Waterloo (1 mile south), Crosby (1 mile north-east), Blundellsands (1 mile north-west), Moor Park (1 mile north-east) and Seaforth (1 mile south-east). We also work in nearby towns such as Liverpool (7 miles south-east), Everton (5 miles south-east), Wavertree (7 miles south-east), Holy Land (7 miles south-east), Tranmere (7 miles south) and Grassendale (10 miles south-east). As one of the bigger places in Liverpool, Brighton-le-Sands is somewhere we visit frequently.

Around Brighton-le-Sands

Typical jobs here are in homes near St John's Church of England Primary School, The Royal Oak pub and Merchant Taylors' Girls' School and the streets around them. You will also find St Edmund of Canterbury church (within half a mile south), Alexandra Park (less than half a mile north) and Sacred Heart Catholic College (0.7 miles north-east). The nearest railway station is Blundellsands & Crosby station, roughly 0.5 miles north-west of the centre. A little further out are New Strand Shopping Centre (2.7 miles south-east) and Clock View Hospital (3.4 miles south-east). For a walk, there’s Crosby Marina and Cabin Hill National Nature Reserve.

Map of Brighton-le-Sands © OpenStreetMap contributors

Should I try a DIY kit first?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Different materials, different repairs

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.

What affects the price in Brighton-le-Sands

Resurfacing from £350. Every quote is fixed and free. What we take into account:

  • Any earlier repairs that need removing first
  • The material and finish
  • Doing more than one item at once
  • How much damage there is

Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Getting a price from pictures

Before you send photos, a few simple things make all the difference:

  • Details of any past repairs
  • What it’s made of, if you know
  • A wider photo showing the entire bath
  • A coin or ruler next to the damage for scale

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Keeping it looking good

How the surface is treated afterwards matters. Here’s what we suggest:

  • Wash away dyes and oils after use
  • A quick wipe after use keeps limescale away
  • Fix dripping taps quickly
  • Avoid suction-cup mats

Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.

On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.

Why repair rather than replace?

When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. Compared with replacing, repairing generally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.

Why Brighton-le-Sands customers choose us

  • A fixed quote before booking
  • CHAS and Constructionline accredited
  • No extra charge for your area
  • A year’s guarantee on all work

Take a look at our pricing and guide to resurfacing and replacement costs.

When to call us in Brighton-le-Sands

A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.

Get in touch if you’ve noticed:

  • Thin, worn enamel in places
  • An old resurfacing that’s failing
  • Several chips and rust patches
  • Brown or grey marks that don’t clean off

What your quote should include

  • If travel is included in the price
  • How long it needs to cure
  • What protection goes down before work starts
  • Aftercare advice

Choosing a repair company

Brighton-le-Sands: your questions answered

Does re-enamelling smell?

There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.

Can I add another job to the visit?

Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.

Do you resurface freestanding baths?

Yes. Inside and out if you’d like.

How soon can you come?

Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.

Can you quote from photos?

Nearly always. If pictures don’t show enough, we’ll ask for another angle.

Will there be a smell?

Expect a mild smell while we are working, which fades afterwards.

How long will the bath be out of use?

Normally one day, with the bath ready the following day. Deeply pitted baths may need a second day.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Landlords, agents and businesses in Brighton-le-Sands

Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.

For anyone letting property in or around Brighton-le-Sands, we’ll quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.