Lancashire · England
Bath Re-enamelling for Runshaw Moor homes
Damaged bath in Runshaw Moor? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- A dull, rough surface that won’t come clean
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it fails, we can still put it right.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
About our bath re-enamelling in Runshaw Moor
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we do not cut corners on it. We regularly repair basins & shower trays, Victorian roll-tops and pressed steel baths, and common reasons people get in touch are a dull, rough surface that won’t come clean and staining under the taps and around the waste.
Big or small, it’s backed by a one-year guarantee.
- Area
- Runshaw Moor (PR7)
- Region
- Lancashire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Runshaw Moor
Other services in Runshaw Moor
What bath re-enamelling costs
Resurfacing from £350. We charge the same across the UK, including Runshaw Moor. What changes the price is:
- The material and finish
- The type of damage
- How hard the colour is to match
- Whether old repairs or coatings need taking off
What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before you book.
Send pictures for a quote
You can usually get a fixed price without us visiting. To make it quick:
- Details of any past repairs
- Any details about the material
- Daylight if possible, and no flash reflection
- A wider photo showing the whole bath
Most customers in Runshaw Moor get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Signs you need bath re-enamelling in Runshaw Moor
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, typically first under the taps and around the waste.
Typical reasons for a call-out include:
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
- A coloured bath you want in white
- A bath that stays dull however much you clean it
Comparing quotes
- Whether the colour is mixed to match
- What happens if they find more damage
- What protection goes down before work starts
- What aftercare is recommended
Where we work around Runshaw Moor
Runshaw Moor is about 2 miles south of Leyland, in Lancashire. We agree a date that works for you, and you will know when to expect us, so there is no waiting around. Runshaw Moor is one of 482 towns and villages in Lancashire where we work. Our nearest city page is Liverpool, about 21 miles away.
Postcode districts we cover here: PR7. We also cover the places around Runshaw Moor: Euxton (1 mile east), Pincock (1 mile south-east), Leyland (2 miles north), Bolton Green (2 miles south-east) and Buckshaw Village (2 miles east). We also work in nearby towns such as Preston (7 miles north), Chorley (3 miles south-east), Lytham St Anne's (14 miles north-west), Bamber Bridge (4 miles north), Accrington (15 miles east) and Fulwood (8 miles north).
Around Runshaw Moor
In Runshaw Moor, that means homes near Worden Park, Leyland St Mary's Catholic High School and Roman Catholic Church of St Mary and the streets around them. For rail, the closest station is Euxton Balshaw Lane station, about 1.4 miles south-east of the centre. Nearby you will also find British Commercial Vehicle Museum (1.6 miles north) and Chorley and South Ribble District General Hospital (2.7 miles east). The countryside around Runshaw Moor includes Healey Nab.
The process
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes the best part of a day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Ensure the room can be ventilated
- Move bottles, mats and clutter away from the area
- Have somewhere for us to park nearby if possible
Ask for a price
If you are in Runshaw Moor and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
Landlord and trade work in Runshaw Moor
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
FAQs for Runshaw Moor
Will there be fumes?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Which areas do you work in?
We work UK-wide, and that includes Runshaw Moor. Prices don’t change with location.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Can you do more than one item on the same visit?
Of course, and it normally saves money. Just add the extra items to your pictures and you’ll get one combined price.
How long does re-enamelling last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Do not leave bottles, razors or sponges standing on the surface
- Do not use the bath until it has fully cured
- A dripping tap should be fixed promptly
- Wash away dyes and oils after use
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Repair or replace in Runshaw Moor?
A replacement frequently means several trades over several days. Resurfacing takes one technician and normally a day, with the bath back in use the day after. Prices start from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Why book with us
- We come to you, anywhere in the UK
- One visit for most repairs
- A fixed quote before booking
- CHAS, Constructionline and SafeContractor accredited
See our prices page and resurfacing vs replacement cost guide.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
About our accreditations · Every repair comes with a one-year guarantee.
