Lancashire · England
Bath Re-enamelling in Pincock
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Pincock. Send photos for a free, fixed quote.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Chips and rust in more than one place
About our bath re-enamelling in Pincock
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. We regularly repair pressed steel baths, basins & shower trays and Victorian roll-tops, and the jobs we see most are stains that won’t shift and a coloured bath you want in white.
Every repair comes with our one-year guarantee, wherever you are in Lancashire.
- Location
- Pincock (PR7)
- County
- Lancashire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How it works
On the day itself, there’s little for you to do. Let us in and show us the room, and we will take it from there. The job generally runs to the best part of a day.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Make sure the room can be ventilated
- Move bottles, mats and clutter away from the area
- Keep a parking space free if you can
How to get a price
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and you’re under no obligation.
Read more
What we can’t put right
A few problems are outside what a surface repair can do:
- Leaks from fittings rather than the bath
- A bath split right through the body
- Holes rusted through the metal
If in doubt, send pictures and we’ll say what we think before you book.
Materials we work on in Pincock
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
What we are called out for in Pincock
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, generally first under the taps and around the waste.
If you can see any of these, send us a photo:
- A coating lifting around the plughole
- Worn patches where water runs and sits
- Several chips and rust patches
- An original cast iron bath that needs restoring
What your quote should include
- What protection goes down before work starts
- Is the price fixed, and does it include VAT?
- Whether cleaning and preparation are in the price
- Whether they match the colour on site
Towns and villages near Pincock
More services for Pincock
Common questions in Pincock
Do you cover Pincock?
We do. We send a technician to Pincock for every job, and the price is the same as everywhere else.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Do you cover the entire of Lancashire?
The whole UK, including all of Lancashire. Send your postcode with your photos and we will offer you dates.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
Can I add another job to the visit?
Of course, and it generally saves money. Send pictures of everything together and you will get one combined price.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Repair dripping taps early
- Do not leave a chip unrepaired
- Dry the bath after use to stop limescale
- Avoid suction-cup mats
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
About Pincock
Pincock is about 2 miles west of Chorley, in Lancashire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover 482 places across Lancashire, from the larger towns to small villages. We work right across the region, from Pincock to Liverpool (about 20 miles away).
All of PR7 is within our area, from the main roads to the quietest streets. Streets in the area include Dunrobin Drive, Wigan Road and Dunnock Drive, all of which we cover. Other places close to Pincock include Bolton Green (1 mile south-west), Euxton (1 mile north), Astley Village (1 mile east), Runshaw Moor (1 mile north-west) and Charnock Richard (2 miles south). Within a short drive, we also cover Preston (8 miles north), Lytham St Anne's (15 miles north-west), Bamber Bridge (5 miles north), Accrington (14 miles north-east), Leyland (3 miles north) and Fulwood (9 miles north).
Local landmarks in Pincock
Locally, our jobs take us to homes close to Balshaw Lane Community Primary School, Euxton Hall Chapel and Parklands High School. Pincock has its own railway station: Euxton Balshaw Lane station. Other landmarks nearby include British Commercial Vehicle Museum (2.7 miles north) and Chorley and South Ribble District General Hospital (1.7 miles east). For a walk, there’s Healey Nab.
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Repair or replace: which is better?
Replacing a bath generally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and usually one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.
What you get with us
- One price list for the entire UK
- One visit for most repairs
- Everything repaired in place
- Honest advice, even when it means no job
See our full price list and bath cost comparison.
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
About our accreditations · Every repair comes with a one-year guarantee.
