Devon · England
Bath re-enamelling & resurfacing in Rushford, Devon
Fixed-price bath re-enamelling in Rushford and the surrounding area, generally in one visit and guaranteed for a year.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Brown or grey marks that don’t clean off
Bath re-enamelling in Rushford without replacing anything
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. Whether it’s a bath that stays dull however much you clean it and an old resurfacing that’s failing, we can typically put it right.
You get a one-year guarantee, the same in Rushford as everywhere else we work.
- Where
- Rushford (PL19)
- County
- Devon
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Aftercare tips
After the repair has cured, a few habits help it last:
- Avoid suction-cup mats
- Keep toiletries on a shelf rather than in the bath
- Have chips seen to early
- Clean with a soft cloth and mild detergent
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Repair or replace in Rushford?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before booking.
Why us?
- No extra charge for your area
- Free fixed quotes from pictures
- Honest advice, even when it means no job
- Work done at your home or business
Read our full price list or resurfacing vs replacement cost guide.
Your questions about bath re-enamelling in Rushford
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Do you cover the entire of Devon?
The whole UK, including all of Devon. Just include your postcode and we’ll offer you dates.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
How do I book?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
Do the materials smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum.
How long will the bath be out of use?
Most baths are done in a day, ready the following day. We give you timings with the quote.
Landlords, agents and businesses in Rushford
We are used to working with agents and managing companies. Just send pictures, the address and how to get access.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
How we price bath re-enamelling
Resurfacing from £350. We give every job a fixed quote from pictures. These are the things that affect it:
- The material
- Whether it’s a chip, crack, burn or wear
- Access to the area
- How much damage there is
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Send photos for a quote
A couple of clear pictures is all it takes. Try to include:
- A coin beside the damage so we can judge size
- A picture taken from further back
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. You will get a fixed price, not an estimate.
Our work in Rushford
Rushford is about 2 miles north-west of Tavistock, in Devon. We agree a date that works for you, and you’ll know when to expect us, so there’s no waiting around. We cover 586 places in Devon.
We work across PL19. Other places close to Rushford include Lamerton (1 mile north), Tavistock (2 miles south-east), Wilminstone (3 miles east), Tiddy Brook Meadows (3 miles south-east) and Whitchurch (4 miles south-east). Larger places within reach include Okehampton (15 miles north-east), Bere Alston (6 miles south), Horrabridge (6 miles south-east), Yelverton (7 miles south-east), Tamerton Foliot (10 miles south) and Lifton (7 miles north-west).
What’s near Rushford
Our customers here include homes close to Blacksmiths Arms, Tavistock College and Church of St Peter and the streets around them. Rushford’s nearest station is Gunnislake station, roughly 3.7 miles south of the centre. Well-known places in the area include Tavistock Museum (2.4 miles south-east) and Tavistock Hospital (2.2 miles south-east). The countryside around Rushford includes Hingston Down.
Do you need bath re-enamelling in Rushford?
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
Customers typically contact us about:
- Chips and rust in more than one place
- Stains that won’t shift
- Thin, worn enamel in places
- An outdated colour you’d like to change
What to look for in a quote
- How soon you can use it again
- How the room is protected while they work
- Whether the colour is mixed to match
- Whether a trained technician does the job
The process
Visits start with a quick look at the job together, so there are no surprises. Then the area is sheeted and masked and the work begins. You can expect it to take most of the day, and we will keep you posted as we go.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can generally be used the next day.
Before we arrive
- Open a window if you can
- Point us to the nearest place to park
- Tell us if there are stairs or a lift
Ask for a price
For a price in Rushford, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
Places near Rushford
Also in Rushford
About our accreditations · Every repair comes with a one-year guarantee.
