Devon · England

Bath Re-enamelling for Mary Tavy homes

Full bath re-enamelling and resurfacing in Mary Tavy, carried out at your home and guaranteed for a year.

  • Resurfacing from £350
  • Thin, worn enamel in places
  • An outdated colour you’d like to change
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Mary Tavy homes

How we handle bath re-enamelling in Mary Tavy

We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. Typical jobs include a peeling or bubbling previous coating and a dull, rough surface that won’t come clean, across basins & shower trays, acrylic baths and Victorian roll-tops.

All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.

Roll-top bath being refinished by a Surface Doctor technician
Where
Mary Tavy (PL19)
Area hub
Devon
Cover
A year, on every repair
Price
From £350. Free and fixed, from your pictures
Call
0345 017 0787
Page updated
23 October 2026

How to care for the repair

Looking after the surface is easy, and it makes a real difference:

  • Leave the bath for the full curing time before using it
  • Have chips seen to early
  • Repair dripping taps early
  • Stick to gentle, non-abrasive cleaners

Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

What we do, step by step

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which usually takes most of the day. If anything looks different from your photos, we will talk to you before going ahead.

  1. First we protect the bathroom and set up ventilation.
  2. Next we degrease the bath and fix chips and rust spots.
  3. The surface is prepared and a bonding primer applied.
  4. We spray on the new enamel finish in several coats.
  5. The bath is left to cure and can usually be used the day after.

Before we arrive

  • Mention any parking restrictions or tricky access
  • Plan for the room to be out of bounds to pets and children
  • Keep a parking space free if you can

Ask for a price

We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

Get a fixed quote

Advice

Mary Tavy and nearby

Mary Tavy is about 4 miles north of Tavistock, in Devon. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. Our technicians cover all 586 towns and villages across Devon, from the larger towns to small villages.

We cover every part of PL19. Streets in the area include Station Road, Great Fellingfield and Moor View, all of which we cover. Close by, we cover Wilminstone (2 miles south), Tavistock (4 miles south), Lamerton (4 miles south-west), Rushford (4 miles south-west) and Whitchurch (4 miles south). We also work in nearby towns such as Okehampton (12 miles north-east), Bere Alston (9 miles south), Horrabridge (6 miles south), Yelverton (7 miles south), Chagford (13 miles north-east) and Tamerton Foliot (12 miles south).

Around Mary Tavy

Our customers here include homes close to Church of St Mary, The Royal Standard Inn and Mary Tavy and Brentor Community Primary School, among other places. Well-known places in the area include Tavistock Hospital (3.6 miles south-west) and Lydford Castle (3.4 miles north). For a walk, there is Vixen Tor.

Map of Mary Tavy © OpenStreetMap contributors

Questions from Mary Tavy

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Is it OK to have pets in the house?

Just keep them out of the work area. We’ll tell you when the room can be used again.

Can you redo someone else’s repair?

Yes, regularly. Removing the old work can add time, and that’s in the quote.

How quickly can you book me in?

It depends on the time of year and where you are. We will offer you dates when we send your quote.

How long is the bath unusable?

Typically one day, with the bath ready the following day. Deeply pitted baths may need a second day.

Can I add another job to the visit?

Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.

What happens after I send pictures?

We review the photos and send a fixed quote and the next dates we have.

Is a repair better than a new one?

Generally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.

What your bath is made of matters

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Pressed steel

Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.

For landlords and businesses

We carry out planned and one-off repairs for housing associations and facilities teams in Devon and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

When a repair is not the answer

In fairness, there are a few things a repair will not fix:

  • Steel that has corroded right through
  • Leaks from fittings rather than the bath
  • A bath split right through the body

Not sure? Send pictures and we will give you a straight answer.

Materials we work on in Mary Tavy

  • Basins & shower trays
  • Cast iron baths
  • Pressed steel baths
  • Victorian roll-tops
  • Acrylic baths

DIY repairs versus a professional job

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

Common problems we fix in Mary Tavy

The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.

Signs it’s time to call us include:

  • Staining under the taps and around the waste
  • Worn patches where water runs and sits
  • A roll-top that’s seen better days
  • A dull, rough surface that won’t come clean

Questions to ask before booking

  • How the colour is matched
  • What prep work is covered
  • Is the price fixed, and does it include VAT?
  • When it can be used again

10 questions to ask before booking

Repairing versus replacing in Mary Tavy

A replacement frequently means several trades over several days. Re-enamelling is one technician, normally one day. Prices start from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.

Why book with us

  • Straight answers about what a repair can do
  • One-year guarantee on every repair
  • Rooms protected and left tidy
  • Colour mixed on the day to match

See our prices page or resurfacing vs replacement cost guide.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.