Central Bedfordshire · England
Bath re-enamelling & resurfacing in Everton, Central Bedfordshire
Full bath re-enamelling and resurfacing at your home in Everton, with a one-year guarantee on every repair.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Stains that will not shift
About our bath re-enamelling in Everton
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We regularly repair basins & shower trays, cast iron baths and acrylic baths, and common reasons people get in touch are a bath that stays dull however much you clean it and staining under the taps and around the waste.
All our work is covered by a one-year guarantee, wherever you are in Central Bedfordshire.
- Location
- Everton (SG19)
- Region
- Central Bedfordshire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What bath re-enamelling costs
Prices start from £350. We charge the same across the UK, including Everton. The price reflects:
- The material
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
- How many items we do on one visit
Our prices are the same across the UK, so there’s no premium for Everton. The job itself decides the price: how much damage, what it’s made of and how many items.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what we need:
- A coin or ruler next to the damage for scale
- One picture of the entire bath
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
For a price in Everton, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
What we do, step by step
There’s not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. Most visits take most of the day, tidy-up included.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Let us know if it has been repaired before
- Keep children and pets away from the room on the day
- Ensure the room can be ventilated
Get a quote
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Related advice
Towns and villages near Everton
Also in Everton
Different materials, different repairs
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
What we are called out for in Everton
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Look out for these signs:
- Stains that won’t shift
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
- Chips and rust in more than one place
What to look for in a quote
- The length of the guarantee and what it covers
- What aftercare is recommended
- When it can be used again
- Whether a trained technician does the job
Looking after it afterwards
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Leave the bath for the full curing time before using it
- Do not let dyes or oils sit on the finish
- Do not leave a chip unrepaired
- Do not leave bottles, razors or sponges standing on the surface
A quick rinse and wipe after use helps, particularly where water is hard, so limescale can’t build up.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Work for landlords and builders
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
About Everton
Everton is about 4 miles north of Biggleswade, in Central Bedfordshire. Anywhere in SG19, a technician comes to you. We cover all 121 towns and villages across Central Bedfordshire. Our nearest city page is London, about 45 miles away.
Jobs in SG19 are booked in the same way as anywhere else. You will find streets such as Church Road, St Mary's Walk and The Lawns, all of which we cover. We also cover the places around Everton: Woodbury (1 mile north-east), Gamlingay Great Heath (1 mile east), Tetworth (1 mile north-east), Potton (2 miles south-east) and Sandy (2 miles west). We also work in nearby towns such as Biggleswade (4 miles south), Flitwick (15 miles south-west), Shefford (8 miles south-west), Ampthill (13 miles south-west), Lower Stondon (10 miles south) and Arlesey (9 miles south).
What’s near Everton
Typical jobs here are in homes near Church of St Mary, Sandy Secondary School and Everton Heath Primary School, among other places. Everton’s nearest station is Sandy station, about 2.1 miles south-west. A little further out are Biggleswade Hospital (3.2 miles south) and Gannocks Castle (2.8 miles north-west). The countryside around Everton includes Gamlingay Meadows.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it fails, we can still put it right.
Everton: your questions answered
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
What do you need from me?
Photos of the damage, a picture of the whole bath and your postcode. Then we will agree a date.
Can you repair several things at once?
Of course, and it typically saves money. Send pictures of everything together and we will quote them together.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum.
How long will the bath be out of use?
One day for most baths, ready the next day. We will confirm timings when we quote.
When we’d advise against a repair
A repair isn’t right for every job, for example:
- Anything hidden under an old coating, until we remove it
- Leaks from fittings rather than the bath
- An acrylic bath that flexes badly underfoot
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
