Wrexham · Wales
Bath re-enamelling & resurfacing in Sandy Lane, Wrexham
Damaged bath in Sandy Lane? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- An outdated colour you’d like to change
Bath re-enamelling at your home in Sandy Lane
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Our technicians work on pressed steel baths, acrylic baths and cast iron baths, and the jobs we see most are enamel that’s lost its shine and feels rough and an old resurfacing that’s failing.
Big or small, you get the same one-year guarantee.
- Area
- Sandy Lane (LL13)
- Area hub
- Wrexham
- Cover
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
For landlords and businesses
Landlords, letting agents and housing providers in Sandy Lane use us as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
We carry out planned and one-off repairs for housing associations and facilities teams in Wrexham and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
About Sandy Lane
Sandy Lane is about 8 miles south-east of Wrexham, in Wrexham. We travel to clients in Sandy Lane and nearby villages, so you don’t need to take anything anywhere. Sandy Lane is one of 115 places in Wrexham where we work. You can also see our page for Liverpool, about 31 miles away.
We cover every part of the LL13 postcode area and the streets around it. If you’re just outside Sandy Lane, we cover Penley (1 mile east), Maelor South (2 miles south-east), Wallington (3 miles north), Ellesmere (3 miles south) and Hanmer (3 miles east). Larger places within reach include Wrexham (8 miles north-west), Caia Park (7 miles north-west), Offa (8 miles north-west), Rhosllannerchrugog (8 miles north-west), Rhosddu (8 miles north-west) and Acton (8 miles north-west).
What’s near Sandy Lane
Typical jobs here are in homes near Church of St Mary Magdalene, The Maelor School and Madras Primary School. Further afield, we also cover the area around Cae Whisken Fieldname (2.3 miles north-west) and Penley Community Hospital (0.8 miles east). Open spaces near Sandy Lane include Hanmer Mere.
What affects the price in Sandy Lane
Resurfacing from £350. A fixed quote means you know the cost before booking. We look at:
- What kind of damage it is
- How much damage there is
- How hard the colour is to match
- Whether old repairs or coatings need taking off
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send pictures for a quote
Before you send photos, a few simple things make all the difference:
- A wider photo showing the entire bath
- A clear, close picture of the problem area
- Natural light rather than flash
- Whether it’s been repaired or coated before
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Do you need bath re-enamelling in Sandy Lane?
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
These are the problems we are asked about most:
- Chips and rust in more than one place
- A bath in a colour that no longer suits
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
What your quote should include
- How the colour is matched
- Whether cleaning and preparation are in the price
- How long it needs to cure
- Aftercare advice
How it works
We begin by going over the job with you. Then the area is sheeted and masked and the work begins. Allow a full day, and we’ll tell you if anything changes.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Preparing for the visit
- Keep a parking space free if you can
- Mention if the room is upstairs or in a flat
- Plan for the room to be out of bounds to pets and children
Ask for a price
If you’re in Sandy Lane and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
When we would advise against a repair
We won’t take on work that will not last, so these are the limits:
- A metal bath with a through crack
- A bath that is rusted through
- Damage hidden under a previous coating, until it’s stripped back
Send us pictures and we’ll tell you honestly.
Materials we work on in Sandy Lane
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
How to look after the repair
Simple care helps the repair last. We recommend:
- Fix dripping taps quickly
- Dry the bath after use to stop limescale
- Stick to gentle, non-abrasive cleaners
- Have chips seen to early
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, typically one day, and the bath is usable the day after. Prices start from £350. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Why us?
- Honest advice, even when it means no job
- Nothing taken out or refitted
- Accredited with CHAS, Constructionline and SafeContractor
- One visit for most repairs
Read our prices page and resurfacing vs replacement cost guide.
Common questions in Sandy Lane
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Can a failed resurfacing be redone?
Generally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
How soon can you come?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Is repairing better than replacing?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Can you repair something that is been repaired before?
Yes, regularly. Removing the old work can add time, and that is in the quote.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from pictures. You will get a fixed figure before booking.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Also near Sandy Lane
Other services in Sandy Lane
About our accreditations · Every repair comes with a one-year guarantee.
