Surrey · England
Bath re-enamelling & resurfacing in Seale, Surrey
Problem with your bath in Seale? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- A period or roll-top bath worth keeping
Keeping it looking good
It’s all simple stuff:
- A quick wipe after use keeps limescale away
- A dripping tap should be fixed promptly
- Clean with a soft cloth and mild detergent
- Never use suction bath mats
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
About our bath re-enamelling in Seale
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Whether it’s enamel that’s lost its shine and feels rough and staining under the taps and around the waste, we can normally put it right, whatever the material.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we will sort it.
- Where
- Seale (GU10)
- County
- Surrey
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What affects the price in Seale
Resurfacing from £350. We don’t charge extra for travel to Seale. The price comes down to:
- How hard the colour is to match
- Previous DIY repairs that have to come out
- Whether we combine several jobs
- Where the damage is and how we get to it
We charge the same wherever you are, so there’s no premium for Seale. The job itself decides the price: how much damage, what it’s made of and how many items.
How to get a fixed price
When you take your photos, these tips help us give you a firm price:
- Any details about the material
- One sharp close-up of the damage
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
The quickest way to a price is to send a couple of photos using our quote form or call us. We’ll say straight away whether it can be repaired.
More services for Seale
Repair or replace in Seale?
A replacement frequently means several trades over several days. Re-enamelling is one technician, generally one day, with the bath back in use the following day. Prices start from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why us?
- Straight answers about what a repair can do
- No need to remove anything
- Fixed prices from your pictures
- One price list for the whole UK
Take a look at our pricing or resurfacing vs replacement cost guide.
About Seale
Seale is about 3 miles south-east of Aldershot, in Surrey. We agree a date that works for you, and we will give you an arrival time in advance, so there’s no waiting around. Seale is one of 395 places in Surrey where we work. We work right across the region, from Seale to London (33 miles away).
Postcode districts we cover here: GU10. Jobs here include addresses on Elstead Road, School Hill and Wood Lane and the roads around them. If you are just outside Seale, we cover Sandy Cross (1 mile west), Tongham (1 mile north-west), The Sands (1 mile south-west), Ash Green (1 mile north) and Ash (2 miles north). Further out, we also cover Guildford (6 miles east), Woking (9 miles north-east), Camberley (8 miles north), Farnham (4 miles west), Frimley (6 miles north) and Haslemere (9 miles south).
Landmarks near Seale
Typical jobs here are in homes near Ash Manor School, St Paul's CofE Infant School & Nursery and Aldershot Park and the streets around them. You’ll also find Church of St Laurence (less than half a mile north), The White Hart pub (1 mile north-west) and The Connaught School (1.4 miles north-west). The nearest railway station is Ash station, about 1.9 miles north of the centre. Further afield, we also cover the area around Seale and Tongham (less than half a mile south-west) and Ash Museum (1.9 miles north). Green spaces nearby include Runfold Wood and Hog's Back.
Honest limits
To be straight with you, some problems need a different fix:
- Problems we can’t see until an old finish comes off
- Acrylic that moves when you stand in it
- A cast iron or steel bath that’s cracked right through
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Landlord and trade work in Seale
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.
What happens on the day
We turn up when we said we would and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. Most visits take most of the day, and the room is left clean and tidy.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the day after.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Have a window or extractor fan available
- Clear the area around the damage
Getting a price
Email us photos of the damage and one of the whole item, with your GU10 postcode, and we will come back with a fixed quote.
Related advice
When to call us in Seale
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Get in touch if you’ve noticed:
- A bath in a colour that no longer suits
- A coating lifting around the plughole
- Staining under the taps and around the waste
- Several chips and rust patches
Before booking anyone
- Who turns up on the day
- Whether the price covers travel
- How to care for the finish
- What prep work is covered
Common questions in Seale
What happens after I send photos?
We review the pictures and send a fixed quote.
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Is there a smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
What do you need from me?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Will the price change on the day?
The price is fixed for what the photos show. If there’s more, we’ll tell you before starting.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and we will quote them together.
About our accreditations · Every repair comes with a one-year guarantee.
