Surrey · England
Bath Repair in Seale
Our repair technicians come to Seale for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Scratches you can feel with a fingernail
- Impact holes in acrylic
Landlord and trade work in Seale
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll handle the rest.
Bath repair in Seale without replacing anything
Chips, cracks, rust spots and small holes is repaired in place. There’s no plumbing to disconnect, the tiles are not touched, and the finish is matched to the rest of the bath. If you are dealing with hairline or through cracks in acrylic and chips along the edge of the bath, we can usually put it right.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Seale (GU10)
- Region
- Surrey
- Warranty
- One year on every repair
- Price
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
What we cannot put right
Honesty matters more than a booking, so here’s what a repair won’t do:
- Wear across the entire surface, which needs re-enamelling
- Cracks in parts of an acrylic bath we cannot get to from below
- Metal that has corroded all the way through
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we repair
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
What else we do in Seale
When to call us in Seale
Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Fittings cause damage too: water collects there, so chips nearby rust quickly.
Typical reasons for a call-out include:
- A hole punched through by something heavy
- Chips under the taps
- Rust spots around the plughole
- Cracks in an acrylic bath
What your quote should include
- If travel is included in the price
- How changes to the job are handled
- What preparation is included
- How the room is protected while they work
Repair or replace in Seale?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. Our prices are the same across the UK, with no extra for Seale. The job itself decides the price: how much damage, what it’s made of and how many items.
Why book with us
- Work done at your home or business
- We’ll tell you if it’s not worth repairing
- Colour-matched on site
- Same prices wherever you are
Read our prices page and bath cost comparison.
Materials and what they mean for the repair
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Prices and what affects them
Prices start from £95. You will not pay by the hour. The price depends on:
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- The material
We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
Good pictures mean an accurate price. Here’s what helps:
- Whether it’s been repaired or coated before
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Seale and nearby
Seale is about 3 miles south-east of Aldershot, in Surrey. Customers in Seale get the same service as everywhere else we cover: a fixed quote from your pictures, then a visit to do the work. Seale is one of 395 places in Surrey where we work. You can also see our page for London, about 33 miles away.
Jobs in GU10 are booked in the same way as anywhere else. You will find streets such as Elstead Road, School Hill and Wood Lane. We also cover the places around Seale: Sandy Cross (1 mile west), Tongham (1 mile north-west), The Sands (1 mile south-west), Ash Green (1 mile north) and Ash (2 miles north). Larger places within reach include Guildford (6 miles east), Woking (9 miles north-east), Camberley (8 miles north), Farnham (4 miles west), Frimley (6 miles north) and Haslemere (9 miles south).
What’s near Seale
Typical jobs here are in homes near Ash Manor School, St Paul's CofE Infant School & Nursery and Aldershot Park. Nearby too are Church of St Laurence (under half a mile north), The White Hart pub (1 mile north-west) and The Connaught School (1.4 miles north-west). The closest station to Seale is Ash station, roughly 1.9 miles north of the centre. Other landmarks nearby include Seale and Tongham (within half a mile south-west) and Ash Museum (1.9 miles north). Not far away are Runfold Wood and Hog's Back.
Seale questions
Will I be able to see the repair?
We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference.
How much does bath repair cost in Seale?
Prices start from £95. Every job gets a fixed price from your pictures. Send a close-up and a picture of the entire item and your postcode.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
What we do, step by step
Here’s how a visit normally runs: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Plan for two to three hours for most chips. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can usually use the bath the day after.
Preparing for the visit
- Ensure the room can be ventilated
- Let us know which floor the room is on
- Keep children and pets away from the room on the day
Ask for a price
For a price in Seale, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
