Surrey · England
Bath Re-enamelling in The Sands
Local bath re-enamelling for The Sands: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- Thin, worn enamel in places
Bath re-enamelling in The Sands without replacing anything
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Common call-outs are for a dull, rough surface that won’t come clean and an original cast iron bath that needs restoring, on cast iron baths, pressed steel baths and acrylic baths.
All our work is covered by our one-year guarantee.
- Where
- The Sands (GU10)
- Area hub
- Surrey
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in The Sands
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Look out for any of the following:
- An original cast iron bath that needs restoring
- A peeling or bubbling previous coating
- A bath in a colour that no longer suits
- Lots of chips and rust spots
What your quote should include
- What aftercare is recommended
- A fixed price, and whether VAT is included
- What preparation is included
- How the room is protected while they work
Honest limits
Not everything can be repaired, and we will tell you before we start. Repairs will not solve:
- A poorly supported acrylic bath, until it’s firmed up
- Leaks from fittings rather than the bath
- A cast iron or steel bath that’s cracked right through
Send us pictures and we’ll tell you honestly before you book.
What we work on
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
How we price bath re-enamelling
Resurfacing from £350. We do not charge extra for travel to The Sands. The price depends on:
- Where the damage is and how we get to it
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
- What the surface is made of
A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with nothing added on the day.
Quotes from your photos
Photographing the damage takes a minute, and it saves a visit. Try to send:
- A picture taken from further back
- Details of any past repairs
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you’re under no obligation.
Covering The Sands
The Sands is about 2 miles east of Farnham, in Surrey. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. We cover 395 places across Surrey. Our nearest city page is London, about 34 miles away.
Postcode districts we cover here: GU10. Jobs here include addresses on The Green, Binton Lane and Botany Hill. We also cover the places around The Sands: Runfold (1 mile west), Sandy Cross (1 mile north), Compton (1 mile west), Seale (1 mile north-east) and Tongham (2 miles north). Larger places within reach include Guildford (8 miles east), Woking (10 miles north-east), Camberley (9 miles north), Frimley (7 miles north), Haslemere (9 miles south) and Cranleigh (12 miles south-east).
Local landmarks in The Sands
Locally, our jobs take us to homes close to Crooksbury Hill, South Farnham School and The Church of the Good Shepherd. The nearest railway station is Farnham station, roughly 2.3 miles west of the centre. Other landmarks nearby include Seale and Tongham (0.9 miles north-east) and Ash Museum (2.8 miles north). Green spaces nearby include Culverswell Hill and Runfold Wood.
Aftercare tips
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Fix dripping taps quickly
- Avoid suction-cup mats
- Stick to gentle, non-abrasive cleaners
- Wash away dyes and oils after use
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
How the visit works
Arrival times are agreed in advance, so you know when to expect us. On site, it takes most of the day for most jobs. We leave the room clean.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Before we arrive
- Open a window if you can
- Let the surface dry out before the visit
- Let us know if it has been repaired before
Getting a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Questions from The Sands
How long will the bath be out of use?
One day for most baths, ready the following day. We give you timings with the quote.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed quote from your photos. Send a close-up of the damage and a wider photo with your GU10 postcode.
Is the work guaranteed?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
What happens next?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
Is there a call-out fee?
There is no separate call-out charge. Your fixed quote includes everything.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
Will the bath be moved?
Not at all. We work on the bath in place, with the room masked and ventilated.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Landlord and trade work in The Sands
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Nearby places to The Sands
What else we do in The Sands
About our accreditations · Every repair comes with a one-year guarantee.
