North Tyneside · England
Bath re-enamelling & resurfacing in Seaton, North Tyneside
Our technicians come to Seaton for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
How we handle bath re-enamelling in Seaton
Resurfacing renews the entire surface of the bath without a refit. It’s the answer when the entire bath is tired rather than one spot. Common call-outs are for a bath in a colour that no longer suits and chips and rust in more than one place, in pressed steel baths, cast iron baths and basins & shower trays.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Seaton (NE26)
- County
- North Tyneside
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Why repair rather than replace?
A replacement frequently means several trades over several days. Resurfacing takes one technician and generally a day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why us?
- Dust sheets down, tidy finish
- A year’s guarantee on all work
- Colour mixed on the day to match
- Fixed prices from your pictures
See our prices page and guide to resurfacing and replacement costs.
Covering Seaton
Seaton is about 3 miles south of Blyth, in North Tyneside. Jobs in Seaton are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Seaton is one of 30 places in North Tyneside we cover. Our nearest city page is Newcastle upon Tyne, about 9 miles away.
Our technicians cover all of NE26. If you’re just outside Seaton, we cover Seaton Sluice (1 mile east), Hartley (1 mile south-east), Earsdon (3 miles south), Whitley Bay (3 miles south-east) and Murton (4 miles south). Within a short drive, we also cover Tynemouth (5 miles south), Wallsend (6 miles south), North Shields (6 miles south-east), Longbenton (5 miles south-west), Cullercoats (4 miles south-east) and Killingworth (4 miles south-west).
What’s near Seaton
We visit homes around New Hartley First School, Astley Community High School and Church of Our Lady. Seaton’s nearest station is Seaton Delaval station, about 1.7 miles west of the centre. Well-known places in the area include Seaton Delaval Urban District (1.5 miles south-west) and Northumbria Specialist Emergency Care Hospital (2.9 miles west).
Do you need bath re-enamelling in Seaton?
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
The things customers usually mention when they call include:
- A bath that stays dull however much you clean it
- Stains that will not shift
- Wear marks under the taps
- Lots of chips and rust spots
Comparing quotes
- How the colour is matched
- Who turns up on the day
- Is the price fixed, and does it include VAT?
- How soon you can use it again
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
What we do, step by step
We work cleanly and quietly, so you can stay at home while we’re there. Protection goes down first, then the work takes most of the day. Before we leave, we explain how soon it can be used and how to look after it.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can usually be used the following day.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Keep children and pets away from the room on the day
- Tell us about any previous repairs or coatings
How to get a price
To get a price, send two or three pictures through our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Read more
How to look after the repair
How the surface is treated afterwards matters:
- Store bottles off the bath
- Do not let dyes or oils sit on the finish
- Fix dripping taps quickly
- Have chips seen to early
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Places near Seaton
Other services in Seaton
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Your questions about bath re-enamelling in Seaton
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Will the price change on the day?
We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
What happens once I’ve sent pictures?
We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Can you quote from photos?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is there a smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
Landlord and trade work in Seaton
If you manage property in Seaton, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
When a repair isn’t the answer
Not everything can be repaired, and we will tell you before we start. We can’t fix:
- Steel that has corroded right through
- A cast iron or steel bath that is cracked right through
- Leaks from fittings rather than the bath
Send us photos and we will tell you honestly.
What we work on
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
