Medway · England
Bath Re-enamelling for Sharnal Street homes
Full bath re-enamelling and resurfacing in Sharnal Street, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- Wear marks under the taps
How we handle bath re-enamelling in Sharnal Street
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Whether it’s an outdated colour you’d like to change and wear marks under the taps, we can help, on acrylic baths, Victorian roll-tops and pressed steel baths alike.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Where
- Sharnal Street (ME3)
- Area hub
- Medway
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Sharnal Street
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Get in touch if you’ve noticed:
- An original cast iron bath that needs restoring
- A coloured bath you want in white
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
Questions to ask before booking
- What the guarantee covers, and for how long
- Whether the price covers travel
- Whether a trained technician does the job
- Whether they match the colour on site
How to look after the repair
How the surface is treated afterwards matters:
- Keep suction mats out of the bath
- Fix dripping taps quickly
- Dry the bath after use to stop limescale
- Keep toiletries on a shelf rather than in the bath
Wipe the bath dry after use where you can, particularly with hard water, and rinse off any bath products.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
Places near Sharnal Street
More services for Sharnal Street
Should you replace it?
Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access.
Why book with us
- We leave the room as we found it
- Work done at your home or business
- One-year guarantee on every repair
- One price list for the whole UK
Take a look at our prices page and bath cost comparison.
The process
We work cleanly and quietly, so you can stay at home while we’re there. Protection goes down first, then the work takes most of the day. At the end we talk you through how soon it can be used and how to care for it.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s typically ready the next day.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Let us know about parking or access
- Ensure the room can be ventilated
Ask for a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
What bath re-enamelling costs
Prices start from £350. Prices are worked out job by job, from your pictures. What matters most is:
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Getting a price from pictures
When you take your pictures, a few simple things make all the difference:
- One picture of the whole bath
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
- Any details about the material
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Sharnal Street and the surrounding area
Sharnal Street is about 5 miles north of Gillingham, in Medway. Clients in Sharnal Street get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. Sharnal Street is one of 68 towns and villages in Medway we cover. Our jobs stretch from Sharnal Street to London (29 miles away).
Every address in ME3 is within our area, from the main roads to the quietest streets. We also travel to Fenn Street (1 mile north-east), High Halstow (1 mile north-west), Tunbridge Hill (1 mile south-east), Kingsnorth (1 mile south-east) and Hoo St Werburgh (1 mile south-west). We also work in nearby towns such as Gillingham (5 miles south), Chatham (6 miles south), Rochester (5 miles south-west), Rainham (6 miles south), Strood (5 miles south-west) and Luton (5 miles south).
Local landmarks in Sharnal Street
We visit homes around High Halstow Primary Academy, The Hundred of Hoo Academy and Church of St Margaret, among other places. Sharnal Street’s nearest station is Gillingham (Kent) station, roughly 3.9 miles south. Nearby you will also find Upnor Castle (3.2 miles south-west) and Medway Maritime Hospital (4.5 miles south). Not far away are Bishop Saltings.
For landlords and businesses
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
What we can’t put right
Not everything can be repaired, and we will tell you before we start. We cannot fix:
- A metal bath with a through crack
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
Not sure? Send photos and we will give you a straight answer before booking.
What we work on
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
Sharnal Street questions
What happens after I send photos?
We review the pictures and send a fixed quote with dates.
Do you charge for travel?
There is no separate call-out charge. The fixed price covers the visit and the work.
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Is there any odour?
There may be a mild smell during the work.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
What if the damage is worse than the pictures show?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We will tell you when the room can be used again.
About our accreditations · Every repair comes with a one-year guarantee.
