Lancashire · England
Bath re-enamelling & resurfacing in Shaw Green, Lancashire
Full bath re-enamelling and resurfacing at your home in Shaw Green, with a one-year guarantee on every repair.
- Resurfacing from £350
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
Bath re-enamelling in Shaw Green, done in place
We don’t move the bath, so the taps, tiles and plumbing are not touched. It typically takes one visit, with the bath ready to use the following day. Whether it’s worn patches where water runs and sits and enamel that’s lost its shine and feels rough, we can help.
Big or small, it’s backed by a one-year guarantee in Shaw Green and across Lancashire.
- Where
- Shaw Green (PR7)
- Region
- Lancashire
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Shaw Green
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
What we’re called out for in Shaw Green
Hard water speeds up the wear, and abrasive cleaners do the most damage.
The most common problems we are called about are:
- A dull, rough surface that will not come clean
- A period or roll-top bath worth keeping
- Stains that won’t shift
- A bath in a colour that no longer suits
What to look for in a quote
- Whether the price covers travel
- What happens if they find more damage
- A fixed price, and whether VAT is included
- How the room is protected while they work
About Shaw Green
Shaw Green is about 2 miles south of Leyland, in Lancashire. Whether you’re in the middle of Shaw Green or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. We work in all 482 towns and villages in Lancashire, from the larger towns to small villages. We work right across the region, from Shaw Green to Liverpool (about 20 miles away).
Our visits in PR7 work the same way as everywhere else we cover. We regularly work on streets such as Deanhall Lane, Dawber's Lane and Runshaw Lane. We also travel to Ulnes Walton (1 mile west), Eccleston (1 mile south), Wymott (2 miles north-west), Heskin Green (2 miles south) and Heskin (2 miles south-west). Further out, we also cover Preston (7 miles north), Chorley (3 miles east), Lytham St Anne's (13 miles north-west), Bamber Bridge (5 miles north-east), Fulwood (8 miles north) and Skelmersdale (8 miles south).
Near you in Shaw Green
Our customers here include homes close to Church of the Blessed Virgin Mary, Leyland St Mary's Catholic High School and Worden Park, among other places. The nearest railway station is Euxton Balshaw Lane station, about 1.7 miles east. Further afield, we also cover the area around Chorley and South Ribble District General Hospital (3.2 miles east) and British Commercial Vehicle Museum (2.4 miles north). For a walk, there’s Healey Nab.
Aftercare tips
Once the work has cured, treat it gently:
- A dripping tap should be fixed promptly
- Wipe the bath dry after use in hard water areas
- Stick to gentle, non-abrasive cleaners
- Keep suction mats out of the bath
Wipe the bath dry after use where you can, and rinse off any bath products.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
What we can’t put right
Some jobs aren’t right for a repair, including:
- A metal bath with a through crack
- Steel that has corroded right through
- Plumbing leaks, which need a plumber
Send us photos and we’ll tell you honestly.
Materials we work on in Shaw Green
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
Common questions in Shaw Green
Do you cover the entire of Lancashire?
Across the UK. Prices do not change with location.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
What happens if you find more damage?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Is there a call-out fee?
We don’t add a call-out fee. The fixed price covers the visit and the work.
How long does re-enamelling take?
One day for most baths, ready the day after. We give you timings with the quote.
What information do you need?
Just pictures, your postcode and a contact number. On the day, access to the room.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Also near Shaw Green
What else we do in Shaw Green
How it works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Plan for the best part of a day. Before leaving, we tell you how long to leave it and how to look after it.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can usually be used the following day.
Getting ready for the visit
- Clear the area around the damage
- Mention any earlier repairs or resurfacing
- Let us know which floor the room is on
Get a quote
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Read more
Prices and what affects them
Prices start from £350. We give every job a fixed quote from pictures. This is what makes a difference:
- What the surface is made of
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Send pictures for a quote
The better the pictures, the more accurate the price. Here’s what we find most useful:
- A clear, close picture of the problem area
- Any earlier repairs or coatings
- Any details about the material
- Daylight if possible, and no flash reflection
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and you are under no obligation.
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
About our accreditations · Every repair comes with a one-year guarantee.
