Lancashire · England
Bath Re-enamelling in Wymott
Fixed-price bath re-enamelling in Wymott and the surrounding area, generally in one visit and guaranteed for a year.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A peeling or bubbling previous coating

Bath re-enamelling in Wymott without replacing anything
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We regularly repair pressed steel baths, acrylic baths and cast iron baths, and people most frequently call us about a period or roll-top bath worth keeping and enamel that’s lost its shine and feels rough.
All our work is covered by a one-year guarantee, wherever you are in Lancashire.

- Where
- Wymott (PR26)
- Area hub
- Lancashire
- Guarantee
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Covering Wymott
Wymott is about 2 miles south-west of Leyland, in Lancashire. Jobs in Wymott are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Wymott is one of 482 towns and villages in Lancashire we cover. You can also see our page for Liverpool, about 20 miles away.
Our technicians cover all of the PR26 postcode area. Jobs here include addresses on Moss Lane, Ulnes Walton Lane and Wray Crescent. We also travel to Moss Side (1 mile north), Ulnes Walton (1 mile south-east), Midge Hall (1 mile north), Croston (2 miles south-west) and Shaw Green (2 miles south-east). Within a short drive, we also cover Preston (6 miles north), Chorley (5 miles south-east), Lytham St Anne's (12 miles north-west), Bamber Bridge (5 miles north-east), Fulwood (7 miles north) and Skelmersdale (9 miles south).
Near you in Wymott
In Wymott, that means homes near Church of St James, Bishop Rawstorne Church of England Academy and Leyland St James Church of England Primary School and the streets around them. The nearest railway station is Croston station, roughly 1.5 miles south-west. Other landmarks nearby include British Commercial Vehicle Museum (2.4 miles north-east) and Chorley and South Ribble District General Hospital (4.6 miles east). Open spaces near Wymott include Mere Sands Wood.
Repairing versus replacing in Wymott
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Our bath re-enamelling starts from £350. Our prices are the same across the UK, with no extra for Wymott. The job itself decides the price: how much damage, what it’s made of and how many items.
Why Wymott customers choose us
- A fixed quote before booking
- Straight answers about what a repair can do
- We leave the room as we found it
- One visit for most repairs
Read our prices page or guide to resurfacing and replacement costs.
Common questions in Wymott
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Do you resurface freestanding baths?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
What happens once I’ve sent pictures?
We come back with a fixed price, generally with dates to choose from. You’re under no obligation.
How long is the bath unusable?
One day for most baths and can be used the day after. We give you timings with the quote.
Can you quote from photos?
Nearly always. If photos do not show enough, we’ll ask for another angle.
When to call us in Wymott
A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
If you can see any of these, send us a photo:
- Stains that will not shift
- A bath in a colour that no longer suits
- A bath that stays dull however much you clean it
- Lots of chips and rust spots
Questions to ask before booking
- What happens if they find more damage
- Whether the colour is mixed to match
- How long the guarantee is and what it covers
- Whether the price covers travel
Honest limits
We’d rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- Holes rusted through the metal
- Anything hidden under an old coating, until we remove it
- A bath split right through the body
If in doubt, send photos and we will say what we think before booking.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
For landlords and businesses
Landlords, letting agents and housing providers in Wymott use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
Can I fix it myself?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
How we price bath re-enamelling
Prices start from £350. We price every job individually, from your pictures. The main factors are:
- The material and finish
- Doing more than one item at once
- The size and number of damaged areas
- Unusual colours or finishes
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your pictures
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Natural light rather than flash
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
For a price in Wymott, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Nearby places to Wymott
Also in Wymott
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes most of the day. If anything looks different from your photos, we will talk to you before going ahead.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
How to prepare
- Open a window if you can
- Tell us about any previous repairs or coatings
- Avoid using the area for a few hours before we arrive
Getting a price
The quickest way to a price is to send a couple of pictures using our quote form or call us. We’ll say right away whether it can be repaired.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.

