Dorset · England

Bath Re-enamelling for Silton homes

Local bath re-enamelling for Silton: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Resurfacing from £350
  • A peeling or bubbling previous coating
  • Brown or grey marks that don’t clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Silton?

Keeping it looking good

It’s all simple stuff, just a few sensible habits:

  • Wash away dyes and oils after use
  • Do not use the bath until it has fully cured
  • Do not leave bottles, razors or sponges standing on the surface
  • Avoid suction-cup mats

Wipe the bath dry after use where you can, and rinse off any bath products.

The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

About our bath re-enamelling in Silton

Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Our technicians work on Victorian roll-tops, cast iron baths and pressed steel baths, and the jobs we see most are chips and rust in more than one place and wear marks under the taps.

The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll come back.

Basin with yellowed glaze resurfaced to a clean white finish
Location
Silton (SP8)
County
Dorset
Guarantee
A year, on every repair
Quotes
From £350. Fixed and free, based on photos
Call
0345 017 0787
Page updated
23 October 2026

Repairing versus replacing in Silton

Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing gives the bath a new finish without moving it. Prices start from £350. The price reflects the work involved, not your postcode. You will see the full price before booking, with no extras added later.

Why us?

  • Rooms protected and left tidy
  • A fixed quote before booking
  • Work done at your home or business
  • One price list for the whole UK

See our pricing or bath cost comparison.

How it works

We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the job itself takes a full day. At the end we talk you through how soon it can be used and how to care for it.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures.

Getting ready for the visit

  • Keep pets and children out of the room while we work
  • Let us know about parking or access
  • Open a window if you can

Ask for a price

Most clients in Silton get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Send photos for a quote

Related advice

How we price bath re-enamelling

Prices start from £350. Prices are worked out job by job, from your pictures. The main factors are:

  • Previous DIY repairs that have to come out
  • How much damage there is
  • The colour and finish to match
  • The material and finish

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.

How to get a fixed price

When you take your pictures, these tips help us give you a firm price:

  • A coin or ruler next to the damage for scale
  • Daylight if possible, and no flash reflection
  • Where you are, by postcode
  • A wider photo showing the whole bath

Send us pictures of the damage and one of the entire item, with your SP8 postcode, and we’ll come back with a fixed quote.

Materials and what they mean for the repair

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Acrylic

Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.

FAQs for Silton

What areas do you cover?

We cover the whole UK, including Silton and the rest of Dorset. Send your postcode with your photos and we’ll offer you dates.

Do you cover Silton?

Yes. We cover the entire UK and travel to Silton and the rest of Dorset. Send us photos for a fixed quote, or call 0345 017 0787.

Will there be a smell?

There may be a mild smell during the work that clears as it cures.

How long does re-enamelling last?

A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.

Do I need to be at home?

Someone needs to let us in and show us the job. You don’t need to watch us work.

Is there a call-out fee?

There is no separate call-out charge. Your fixed price includes everything.

Is the work guaranteed?

Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.

It’s been repaired before. Can you still fix it?

Usually, yes. We remove the old repair before doing a new one, so let us know about it.

Work for landlords and builders

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

Landlords, letting agents and housing providers in Silton use us as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.

When to call us in Silton

A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.

Keep an eye out for these signs:

  • Enamel that is lost its shine and feels rough
  • Brown or grey marks that do not clean off
  • A period or roll-top bath worth keeping
  • An old resurfacing that’s failing

Before you book anyone

  • How your room will be protected
  • How to look after the finish
  • The length of the guarantee and what it covers
  • Whether the colour is mixed to match

Choosing a repair company

Covering Silton

Silton is about 11 miles south-west of Warminster, in Dorset. We visit clients in Silton and the surrounding area, so there’s no workshop to go to. We work in 462 places across Dorset.

We work across SP8 and the streets around it. If you are just outside Silton, we cover Bourton (1 mile north-west), Zeals (1 mile north), Penselwood (1 mile north-west), White Cross (2 miles north) and Pear Ash (2 miles north-west). Within a short drive, we also cover Gillingham (3 miles south-east), Shaftesbury (7 miles south-east), Sherborne (12 miles south-west), Sturminster Newton (10 miles south), Milborne Port (9 miles south-west) and Stalbridge (8 miles south).

What’s near Silton

Locally, our jobs take us to homes close to The White Lion Inn, Church of St Nicholas and St George's Church of England School. For rail, the closest station is Gillingham (Dorset) station, about 2.9 miles south-east. Well-known places in the area include Ballands Castle (1.9 miles north-west) and Mere Museum (2.5 miles north-east). Open spaces near Silton include White Sheet Hill.

Map of Silton © OpenStreetMap contributors

What a repair can’t fix

A repair isn’t always the answer, and we will tell you before we start. We cannot fix:

  • Acrylic that moves when you stand in it
  • Damage hidden under a previous coating, until it’s stripped back
  • Plumbing leaks, which need a plumber

If in doubt, send pictures and we’ll say what we think.

Surfaces we repair

  • Pressed steel baths
  • Victorian roll-tops
  • Acrylic baths
  • Basins & shower trays
  • Cast iron baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.