Wiltshire · England
Bath Re-enamelling for Zeals homes
Fixed-price bath re-enamelling in Zeals and the surrounding area, usually in one visit.
- Resurfacing from £350
- Wear marks under the taps
- Staining under the taps and around the waste
Bath re-enamelling in Zeals without replacing anything
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. Whether it’s a bath in a colour that no longer suits and lots of chips and rust spots, we can help, on acrylic baths, basins & shower trays and Victorian roll-tops alike.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Area
- Zeals (BA12)
- Region
- Wiltshire
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we are called out for in Zeals
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
The most common problems we’re called about are:
- Brown or grey marks that don’t clean off
- An original cast iron bath that needs restoring
- An old resurfacing that’s failing
- Thin, worn enamel in places
What to look for in a quote
- How the colour is matched
- What protection goes down before work starts
- Who will actually do the work
- When it can be used again
Landlord and trade work in Zeals
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Zeals questions
Can you price it without visiting?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
Do you cover the entire of Wiltshire?
Across the UK, and that includes Zeals. Prices do not change with location.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day.
Is my repair covered?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
About Zeals
Zeals is about 10 miles south-west of Warminster, in Wiltshire. Jobs in Zeals are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. We cover 425 places across Wiltshire.
Jobs in BA12 work the same way as everywhere else we cover. Whether you live on New Road, Tulse Hill and Zeals Rise or a nearby road, a technician can come to you. We also travel to White Cross (1 mile north-west), Bourton (1 mile south-west), Penselwood (1 mile west), Pear Ash (1 mile west) and Silton (1 mile south). Further out, we also cover Westbury (13 miles north-east), Warminster (10 miles north-east), Tisbury (10 miles east), Boreham (10 miles north-east), North Bradley (15 miles north) and Bratton (15 miles north-east).
Landmarks near Zeals
Typical jobs here are in homes near The White Lion Inn, Church of St Martin and Whitesheet Church of England Primary Academy and the streets around them. The nearest railway station is Gillingham (Dorset) station, about 3.9 miles south-east of the centre. Other landmarks nearby include Ballands Castle (1.7 miles west) and Four Towers (2.9 miles west). The countryside around Zeals includes White Sheet Hill.
Places near Zeals
More services for Zeals
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
What we can’t put right
A few problems are outside what a surface repair can do:
- A bath that’s rusted through
- An acrylic bath that flexes badly underfoot
- A bath split right through the body
Send us photos and we’ll tell you honestly.
Materials we repair
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
How it works
Your technician turns up at the time we agreed with you and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. The work itself takes the best part of a day, and the room is left clean and tidy.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Have a window or extractor fan available
- Point us to the nearest place to park
Getting a price
For a price in Zeals, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
How to look after the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Don’t let dyes or oils sit on the finish
- Do not leave a chip unrepaired
- Do not use the bath until it has fully cured
- Do not leave bottles, razors or sponges standing on the surface
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
How we price bath re-enamelling
Resurfacing from £350. Each job gets its own fixed quote. These are the things that affect it:
- What kind of damage it is
- The material
- Any earlier repairs that need removing first
- How easy the damage is to reach
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed quote
A couple of clear pictures is all it takes. It helps if you send:
- Daylight if possible, and no flash reflection
- Any details about the material
- One sharp close-up of the damage
- Any earlier repairs or coatings
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
About our accreditations · Every repair comes with a one-year guarantee.
