Kent · England
Bath Re-enamelling in Skeete
Our technicians come to Skeete for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A coating lifting around the plughole
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Bath re-enamelling in Skeete, done in place
The bath stays where it is, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, with the bath ready to use the following day. If you’re dealing with a peeling or bubbling previous coating and brown or grey marks that don’t clean off, we can generally put it right.
Every job is backed for twelve months in Skeete and everywhere else. We return to put right any problem with the work.
- Area
- Skeete (CT18)
- County
- Kent
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. You’ll know the full cost before booking. We take into account:
- The material and finish
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- Doing more than one item at once
Compared with replacing, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Send pictures for a quote
We price nearly every job from photos. This is what to send:
- A close-up of the damage, in focus
- Any earlier repairs or coatings
- Natural light rather than flash
- A coin or ruler next to the damage for scale
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed price back. There is no charge for the quote and no obligation.
How it works
We work cleanly and quietly, so you can stay at home while we are there. Protection goes down first, then the work takes the best part of a day. Before we leave, we explain how soon it can be used and how to look after it.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can generally be used the next day.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
How to get a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Advice
Your questions about bath re-enamelling in Skeete
What happens once I’ve sent photos?
You’ll get a fixed quote back, typically with dates to choose from. There’s no obligation to book.
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Include pictures of each item.
How do I get a price for bath re-enamelling in Skeete?
Resurfacing from £350. Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Do I have to be there?
We need someone to let us in. You do not need to watch us work.
Is my repair covered?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Our work in Skeete
Skeete is about 4 miles north of Hythe, in Kent. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our repair technicians cover all 922 towns and villages in Kent. We work right across the region, from Skeete to London (56 miles away).
Here we cover the CT18 postcode area. We also cover the places around Skeete: Woodland (1 mile north-east), Hemsted (1 mile north), Lyminge (1 mile east), Rhodes Minnis (1 mile north-east) and Postling (1 mile south). Further out, we also cover Ashford (8 miles west), Canterbury (10 miles north), Dover (10 miles east), Folkestone (6 miles south-east), Faversham (15 miles north-west) and Hythe (4 miles south).
Near you in Skeete
Around Skeete, we work in homes near Stowting Church of England Primary School, among other places. For rail, the closest station is Westenhanger station, roughly 2.5 miles south-west of the centre. Further afield, we also cover the area around Royal Victoria Hospital (5.6 miles south-east) and Saltwood Castle (3.4 miles south). Green spaces nearby include Hatch Park and Tolsford Hill.
Work for landlords and builders
Landlords, letting agents and housing providers in Skeete use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Do you need bath re-enamelling in Skeete?
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Typical reasons for a call-out include:
- Chips and rust in more than one place
- An original cast iron bath that needs restoring
- A dull, rough surface that will not come clean
- A coloured bath you want in white
Comparing quotes
- Whether a trained technician does the job
- When it can be used again
- What prep work is covered
- How changes to the job are handled
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Damage hidden under a previous coating, until it’s stripped back
- An acrylic bath that flexes badly underfoot
- Plumbing leaks, which need a plumber
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. We don’t add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- A fixed quote before booking
- Colours mixed by hand to suit your surface
- Repair technicians who travel to you, UK-wide
- One-year guarantee on every repair
Read our full price list or bath cost comparison.
What else we do in Skeete
About our accreditations · Every repair comes with a one-year guarantee.
