Hampshire · England
Bath Re-enamelling for Soldridge homes
Full bath re-enamelling and resurfacing at your home in Soldridge, with a one-year guarantee on every repair.
- Resurfacing from £350
- A coloured bath you want in white
- An old resurfacing that’s failing
Bath re-enamelling at your home in Soldridge
Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. Whether it’s brown or grey marks that don’t clean off and an old resurfacing that’s failing, we can usually put it right, on basins & shower trays, acrylic baths and Victorian roll-tops alike.
All of our repairs are guaranteed for twelve months in Soldridge and everywhere else. If something goes wrong with the work, we come back.
- Area
- Soldridge (GU34)
- Area hub
- Hampshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Soldridge
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Signs it’s time to call us include:
- A bath that stays dull however much you clean it
- A period or roll-top bath worth keeping
- Chips and rust in more than one place
- Worn patches where water runs and sits
Before you book anyone
- What aftercare is recommended
- How the room is protected while they work
- What preparation is included
- Whether a trained technician does the job
About Soldridge
Soldridge is about 5 miles south-west of Alton, in Hampshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We work in 683 places across Hampshire. Our nearest city page is London, about 50 miles away.
We work across the GU34 postcode area and the streets around it. You will find streets such as Upper Soldridge Road, Rookwood Lane and Soldridge Road, all of which we cover. Nearby, we also work in Medstead (1 mile north-east), Four Marks (1 mile east), South Town (1 mile north), Hattingley (2 miles north) and New Copse (2 miles north). Further out, we also cover Basingstoke (11 miles north), Winchester (11 miles west), Eastleigh (15 miles south-west), Fleet (15 miles north-east), Horndean (14 miles south) and Alton (5 miles north-east).
What’s near Soldridge
In Soldridge, that means homes near Church of the Good Shepherd, among other places. Other landmarks nearby include Alton Community Hospital (4.1 miles north-east) and Barton Castle (2.7 miles north-west). Not far away are Red Hill.
FAQs for Soldridge
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
How do I book?
Use the quote form or ring 0345 017 0787, and we will do the rest.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote.
Is my repair covered?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Do you cover Soldridge?
We do. Technicians travel to Soldridge from across the region, and the price is the same as everywhere else.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Landlords, agents and businesses in Soldridge
We regularly work with letting and managing agents. Send the address, pictures and access details and we will handle the rest.
If you manage property in Soldridge, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.
When a repair is not the answer
It helps to know what we cannot do too:
- Plumbing leaks, which need a plumber
- A bath that is rusted through
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
Also near Soldridge
More services for Soldridge
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and typically a day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Why us?
- Rooms protected and left tidy
- Colours mixed by hand to suit your surface
- A year’s guarantee on all work
- CHAS and Constructionline accredited
See our pricing or resurfacing vs replacement cost guide.
How the visit works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes a full day. We clean up when we are done and let you know when you can use it again.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Have a window or extractor fan available
- Clear toiletries, mats and anything else from around the area
Get a quote
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Related advice
Prices and what affects them
Resurfacing from £350. We charge the same across the UK, including Soldridge. What changes the price is:
- The material and finish
- How easy the damage is to reach
- The size and number of damaged areas
- How many items we do on one visit
Set against the cost of replacement, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Quotes from your pictures
Most quotes are done from pictures alone. To help us price it:
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
- A clear, close picture of the problem area
Upload a picture of the damage and one of the entire item, with your GU34 postcode, and we’ll reply with a fixed quote.
Aftercare tips
Aftercare is simple:
- Have chips seen to early
- Don’t let dyes or oils sit on the finish
- A quick wipe after use keeps limescale away
- Stick to gentle, non-abrasive cleaners
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
About our accreditations · Every repair comes with a one-year guarantee.
