Hampshire · England
Bath Re-enamelling in New Copse
Bath re-enamelling in and around New Copse: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- A coating lifting around the plughole
About our bath re-enamelling in New Copse
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Our technicians work on acrylic baths, pressed steel baths and cast iron baths, and the jobs we see most are a bath that stays dull however much you clean it and a period or roll-top bath worth keeping.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Location
- New Copse (GU34)
- County
- Hampshire
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What affects the price in New Copse
Resurfacing from £350. Prices are worked out job by job. The main factors are:
- The size and number of damaged areas
- Whether we combine several jobs
- What kind of damage it is
- The colour and finish to match
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Send pictures for a quote
Photographing the damage takes a minute. Try to send:
- What it’s made of, if you know
- One picture of the whole bath
- Your postcode, so we can check dates
- A close-up of the damage, in focus
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Towns and villages near New Copse
What else we do in New Copse
How the visit works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Plan for a full day from start to finish. Before we go, we will explain how long to leave it and what to avoid for the first few days.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Clear the area around the damage
- Keep children and pets away from the room on the day
Getting a price
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed price. There’s no charge for the quote and you are under no obligation.
Advice
What we cannot put right
In fairness, some problems need a different fix:
- A metal bath with a through crack
- An acrylic bath that flexes badly underfoot
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send photos and we will say what we think.
Materials we work on in New Copse
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
Repair or replace in New Copse?
A replacement often means several trades over several days. Resurfacing takes one technician and normally a day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. Compared with replacing, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
What you get with us
- Rooms protected and left tidy
- No extra charge for your area
- We come to you, anywhere in the UK
- CHAS and Constructionline accredited
Read our full price list or guide to resurfacing and replacement costs.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Keeping it looking good
Simple care helps the repair last. We recommend:
- Wipe the bath dry after use in hard water areas
- Respect the curing time we give you
- A dripping tap should be fixed promptly
- Rinse off hair dye, oils and bath bombs right away
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
FAQs for New Copse
Do the materials smell?
There may be a mild smell during the work that clears as it cures.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.
Will the new finish last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Can landlords book you?
Yes, frequently. We can quote for several properties together and work between tenancies.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and you’ll get one combined price.
Which areas do you work in?
All of Hampshire, and the rest of the UK. There’s no extra charge for travel.
Signs you need bath re-enamelling in New Copse
Many baths we resurface have simply been well used, and only the surface is worn. Underneath, a cast iron or steel bath is typically as strong as ever.
It’s worth getting a quote if you see:
- A coloured bath you want in white
- Enamel that’s lost its shine and feels rough
- Thin, worn enamel in places
- A coating lifting around the plughole
What your quote should include
- What aftercare is recommended
- How the room is protected while they work
- Is the price fixed, and does it include VAT?
- If travel is included in the price
Covering New Copse
New Copse is about 4 miles west of Alton, in Hampshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. New Copse is one of 683 places in Hampshire where we work. We work right across the region, from New Copse to London (49 miles away).
Here we cover the GU34 postcode area. We also travel to South Town (1 mile south), Holt End (1 mile north), Hattingley (1 mile south-west), Wivelrod (1 mile east) and Bentworth (1 mile north-east). Within a short drive, we also cover Basingstoke (9 miles north), Winchester (12 miles south-west), Fleet (14 miles north-east), Aldershot (15 miles north-east), Alton (4 miles east) and Petersfield (11 miles south-east).
Around New Copse
In New Copse, that means homes near Church of St Andrew and Medstead Church of England Primary School, among other places. The closest station to New Copse is Alton station, about 4.3 miles east of the centre. Other landmarks nearby include Alton Community Hospital (3.2 miles east) and Gliding Heritage Centre (3.7 miles north-east). Green spaces nearby include King's Hill.
About our accreditations · Every repair comes with a one-year guarantee.
