East Riding of Yorkshire · England

Bath Re-enamelling for South Cave homes

Damaged bath in South Cave? We repair it in place, match it on site and back it with a one-year guarantee.

  • Resurfacing from £350
  • An outdated colour you’d like to change
  • A coating lifting around the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in South Cave

How we handle bath re-enamelling in South Cave

We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. We are often asked to fix lots of chips and rust spots and a dull, rough surface that won’t come clean, across acrylic baths, cast iron baths and pressed steel baths.

We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.

Where
South Cave (HU15)
Region
East Riding of Yorkshire
Guarantee
One year on every repair
Quote
From £350. Fixed and free, based on pictures
Telephone
0345 017 0787
Updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

For landlords and businesses

For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.

We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.

DIY repairs versus a professional job

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

When we’d advise against a repair

In fairness, there are a few things a repair will not fix:

  • A poorly supported acrylic bath, until it’s firmed up
  • Damage hidden under a previous coating, until it’s stripped back
  • A metal bath with a through crack

If in doubt, send photos and we will say what we think before you book.

Materials we work on in South Cave

  • Cast iron baths
  • Basins & shower trays
  • Acrylic baths
  • Victorian roll-tops
  • Pressed steel baths

About South Cave

South Cave is about 9 miles south-west of Beverley, in East Riding of Yorkshire. Jobs in South Cave are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. We work in 299 places in East Riding of Yorkshire, from the larger towns to small villages. You can also see our page for Leeds, about 38 miles away.

Jobs in HU15 are booked in the same way as anywhere else. Jobs here include addresses on Market Place, Station Road and Thornham Close and the roads around them. With the A1034 close by, South Cave is easy for our technicians to reach. Nearby, we also work in Ellerker (1 mile south), Everthorpe (1 mile north-west), Drewton (1 mile north), North Cave (2 miles north-west) and Hotham (3 miles north-west). We also work in nearby towns such as Beverley (9 miles north-east), Goole (11 miles west), Pocklington (13 miles north-west), Hessle (7 miles east), Cottingham (8 miles east) and Market Weighton (7 miles north).

Local landmarks in South Cave

In South Cave, that means homes near Church of All Saints and The Bear pub and the streets around them. The nearest railway station is Brough station, roughly 3 miles south-east of the centre. Other landmarks nearby include Cave Castle (within half a mile north). Open spaces near South Cave include North Cave Wetlands.

Map of South Cave © OpenStreetMap contributors

Materials and what they mean for the repair

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Repair or replace: which is better?

Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not where you live. You will see the full price before booking, with nothing added on the day.

Why book with us

  • Fixed prices from your photos
  • Repair technicians who travel to you, UK-wide
  • Straight answers about what a repair can do
  • No need to remove anything

Take a look at our pricing or bath cost comparison.

Do you need bath re-enamelling in South Cave?

Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.

Keep an eye out for these signs:

  • Lots of chips and rust spots
  • Brown or grey marks that do not clean off
  • A period or roll-top bath worth keeping
  • Thin, worn enamel in places

Before you book anyone

  • How to look after the finish
  • How long it needs to cure
  • How long the guarantee is and what it covers
  • What protection goes down before work starts

10 questions to ask before booking

Looking after it afterwards

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Store bottles off the bath
  • Clean with a soft cloth and mild detergent
  • Leave the bath for the full curing time before using it
  • Wipe the bath dry after use in hard water areas

A quick rinse and wipe after use helps, particularly where water is hard, so limescale cannot build up.

The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.

South Cave questions

Is it OK to have pets in the house?

Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.

Someone resurfaced my bath and it’s peeling. Can you help?

Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.

I rent my home. Can I book you?

Of course. Ask your landlord first, and we can send them the quote if that helps.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as householders in South Cave.

Can you quote from photos?

Nearly always. If photos don’t show enough, we will ask for another angle.

What if the damage is worse than the pictures show?

We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.

How much does bath re-enamelling cost in South Cave?

Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.

Do you come to South Cave?

Yes. We work across the UK and travel to South Cave. Send pictures and we will quote, or call 0345 017 0787.

How it works

We agree an arrival time beforehand, so you’re not left guessing. On site, it takes most of the day for most jobs. We leave the room clean.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. Several coats of finish are sprayed on, then it cures until the following day.

Preparing for the visit

  • Keep children and pets away from the room on the day
  • Mention if the room is upstairs or in a flat
  • Mention any earlier repairs or resurfacing

Get a quote

You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Get a fixed quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.