Lincolnshire · England
Bath Re-enamelling in South Owersby
Fixed-price bath re-enamelling in South Owersby and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A bath in a colour that no longer suits
Can I fix it myself?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Bath re-enamelling in South Owersby, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We’re often asked to fix a coating lifting around the plughole and a bath that stays dull however much you clean it, across pressed steel baths, Victorian roll-tops and cast iron baths.
All our work comes with a one-year guarantee.
- Location
- South Owersby (LN8)
- Area hub
- Lincolnshire
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How it works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes the best part of a day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Ensure the room can be ventilated
- Avoid using the area for a few hours before we arrive
- Clear toiletries, mats and anything else from around the area
How to get a price
Email us a picture of the damage and one of the whole item, and tell us you are in South Owersby, and we will reply with a fixed price.
Advice
Your questions about bath re-enamelling in South Owersby
Will there be a smell?
Expect a mild smell while we are working.
Is it safe with children and pets around?
Just keep them out of the work area. We will tell you when the room can be used again.
Will the price change on the day?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Can you redo someone else’s repair?
Yes, we frequently do. It can add a little time, which we include in the quote.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
How long is the bath unusable?
Most baths are done in a day, ready the following day. We will confirm timings when we quote.
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why South Owersby clients choose us
- Honest advice, even when it means no job
- Most jobs done in one visit
- Fixed prices from your photos
- Nothing taken out or refitted
Take a look at our full price list and resurfacing vs replacement cost guide.
Nearby places to South Owersby
What else we do in South Owersby
About South Owersby
South Owersby is about 14 miles south-east of Scunthorpe, in Lincolnshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. South Owersby is one of 732 towns and villages in Lincolnshire where we work. Our nearest city page is Leeds, about 54 miles away.
Postcode districts we cover here: LN8. We also cover the places around South Owersby: North Owersby (1 mile north), Osgodby (1 mile south-east), Thornton le Moor (2 miles north-west), Claxby (3 miles east) and Middle Rasen (3 miles south-east). Within a short drive, we also cover Lincoln (15 miles south-west), Gainsborough (15 miles west), New Waltham (15 miles north-east), Ermine (14 miles south-west), Market Rasen (4 miles south-east) and Welton (9 miles south).
What’s near South Owersby
In South Owersby, that means homes near Church of St Andrew and Osgodby Primary School. South Owersby’s nearest station is Market Rasen station, about 4.1 miles south-east. A little further out are Medieval castle and ecclesiastical complex (0.6 miles south-west). Open spaces near South Owersby include Wolds Top.
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
- Problems we can’t see until an old finish comes off
Send us photos and we will tell you honestly before booking.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Landlords, agents and businesses in South Owersby
We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.
For anyone letting property in or around South Owersby, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
How to look after the repair
Aftercare is simple:
- Store bottles off the bath
- Rinse off hair dye, oils and bath bombs straight away
- Stick to gentle, non-abrasive cleaners
- Keep suction mats out of the bath
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
What affects the price in South Owersby
Prices start from £350. We charge the same across the UK, including South Owersby. What changes the price is:
- Whether old repairs or coatings need taking off
- The material and finish
- How hard the colour is to match
- The type of damage
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
Phone photos are fine, there is no need for anything special. Just make sure we can see:
- The material, if you know it
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- The postcode, so we can plan the visit
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
