Devon · England
Bath re-enamelling & resurfacing in South Milton, Devon
Bath re-enamelling for South Milton, without a refit. Get a fixed price from your photos, then we come to you.
- Resurfacing from £350
- Worn patches where water runs and sits
- A dull, rough surface that won’t come clean
Bath re-enamelling in South Milton without replacing anything
Resurfacing renews the entire surface of the bath without taking anything out. It’s the answer when the whole bath is tired rather than one spot. Whether it’s chips and rust in more than one place and a bath in a colour that no longer suits, we can generally put it right, on Victorian roll-tops, pressed steel baths and basins & shower trays alike.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Area
- South Milton (TQ7)
- Region
- Devon
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Aftercare tips
Much of the damage we repair could have been avoided. A few tips:
- Never use suction bath mats
- Clean with a soft cloth and mild detergent
- Keep toiletries on a shelf rather than in the bath
- Wash away dyes and oils after use
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Common questions in South Milton
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Are there extra charges for South Milton?
There’s no separate call-out charge. Your fixed quote includes everything.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside if you’d like.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Also near South Milton
More services for South Milton
What happens on the day
There’s not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. Most visits take most of the day, including clearing up.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Mention any earlier repairs or resurfacing
- Keep children and pets away from the room on the day
Getting a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed price back. There’s no charge for the quote and you are under no obligation.
Related advice
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
What we’re called out for in South Milton
Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Send us a picture if you notice any of these:
- Wear marks under the taps
- Chips and rust in more than one place
- Enamel that’s lost its shine and feels rough
- A peeling or bubbling previous coating
What your quote should include
- What the guarantee covers, and for how long
- How to care for the finish
- Who turns up on the day
- What happens if they find more damage
Prices and what affects them
Resurfacing from £350. We do not charge extra for travel to South Milton. The price depends on:
- Doing more than one item at once
- Where the damage is and how we get to it
- The material
- How hard the colour is to match
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Quotes from your pictures
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Natural light rather than flash
- Where you are, by postcode
- Any earlier repairs or coatings
- The material, if you know it
The quickest way to a price is to send a couple of pictures through our quote form or call us. We will tell you honestly whether it can be repaired.
Repair or replace in South Milton?
A replacement frequently means several trades over several days. Re-enamelling is one technician, usually one day, and the bath is usable the day after. Prices start from £350. Compared with replacing, a repair is normally a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
What you get with us
- We will tell you if it’s not worth repairing
- Everything repaired in place
- Repair technicians who travel to you, UK-wide
- Fixed prices from your photos
Take a look at our full price list and resurfacing vs replacement cost guide.
Landlords, agents and businesses in South Milton
For anyone letting property in or around South Milton, we’ll quote for several properties at once. Send photos for each one and we will come back with a combined price.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
About South Milton
South Milton is about 16 miles south-east of Plymouth, in Devon. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. South Milton is one of 586 towns and villages in Devon where we work.
Postcode districts we cover here: TQ7. Jobs here include addresses on Backshay Close and Kerse Lane. Close by, we cover Thurlestone (1 mile west), Buckland (1 mile west), Galmpton (2 miles south), Bantham Cross (2 miles north) and Churchstow (2 miles north). Within a short drive, we also cover Ivybridge (9 miles north-west), Totnes (13 miles north-east), Dartmouth (12 miles north-east), Bridgetown (13 miles north-east), Salcombe (3 miles south-east) and Townstal (12 miles north-east).
Landmarks near South Milton
Our clients here include homes close to Kingsbridge Academy and All Saints Church and the streets around them. Well-known places in the area include South Hams Hospital (2.3 miles north-east) and Salcombe Castle (3.7 miles south-east). Green spaces nearby include South Efford Marsh.
About our accreditations · Every repair comes with a one-year guarantee.
