Greater London · England
Bath re-enamelling & resurfacing in Southall, Greater London
Bath re-enamelling for Southall, without a refit. Send us photos for a fixed price, then book a visit.
- Resurfacing from £350
- Thin, worn enamel in places
- Chips and rust in more than one place
Repair or replace in Southall?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
What you get with us
- Every repair guaranteed for a year
- Repair technicians who travel to you, UK-wide
- Fixed prices from your pictures
- Generally one visit, start to finish
Take a look at our pricing and bath cost comparison.
About our bath re-enamelling in Southall
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. We work on pressed steel baths, basins & shower trays and Victorian roll-tops, and common reasons people contact us are an outdated colour you’d like to change and worn patches where water runs and sits.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll come back.
- Location
- Southall (UB2, UB1, UB6, W7)
- Region
- Greater London
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Also near Southall
More services for Southall
Work for landlords and builders
We are used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
FAQs for Southall
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
How long does re-enamelling take?
Normally one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Someone resurfaced my bath and it’s peeling. Can you help?
Usually, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
What areas do you cover?
We work UK-wide, and that includes Southall. Our prices are the same everywhere.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
What we’re called out for in Southall
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
Send us a photo if you notice any of these:
- Wear marks under the taps
- Brown or grey marks that do not clean off
- Chips and rust in more than one place
- A bath that stays dull however much you clean it
Comparing quotes
- Who turns up on the day
- The length of the guarantee and what it covers
- Whether they match the colour on site
- When it can be used again
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- A metal bath with a through crack
- A bath that’s rusted through
- Leaking taps or wastes (a plumber’s job)
Send us pictures and we will tell you honestly before booking.
Materials we work on in Southall
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
About Southall
Southall is about 3 miles west of Ealing, in Greater London. We visit customers in Southall and nearby villages, so you don’t need to take anything anywhere. We cover 764 places across Greater London, from the larger towns to small villages. Our nearest city page is London, about 12 miles away.
We cover every part of the UB2, UB1, UB6 and W7 postcode area. Local streets include Uxbridge Road High Street, Emerald Square and Randolph Road, all of which we cover. Close by, we cover Dormers Wells (1 mile north-east), West Ealing (2 miles east), Yeading (2 miles north), Yiewsley (2 miles north) and Hanwell (2 miles east). Further out, we also cover London (12 miles east), City of Westminster (10 miles east), Marylebone (10 miles east), Kensington (8 miles east), St Pancras (11 miles east) and Shoreditch (13 miles east).
What’s near Southall
In Southall, that means homes near Saint John, Glassy Junction pub and Villiers High School, among other places. Nearby too are Minet Country Park (1 mile west) and Hambrough Primary School (less than half a mile north). There is a railway station in Southall itself: Southall station. Well-known places in the area include Municipal Borough of Heston and Isleworth (2.8 miles south-east) and St Bernard's Hospital (1.2 miles east). Not far away are Northala Fields and Middle Lake.
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Get any chip repaired quickly
- Stick to gentle, non-abrasive cleaners
- Wipe the bath dry after use in hard water areas
- Do not let dyes or oils sit on the finish
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
The process
Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for most of the day. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
Before we arrive
- Tell us if there are stairs or a lift
- Tell us about any previous repairs or coatings
- Keep children and pets away from the room on the day
Getting a price
For a price in Southall, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
