Cornwall · England

Bath Re-enamelling in Sparry Bottom

Full bath re-enamelling and resurfacing at your home in Sparry Bottom, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • A coating lifting around the plughole
  • Lots of chips and rust spots
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Sparry Bottom?

Sparry Bottom: your questions answered

Do you cover Sparry Bottom?

Yes. We cover the entire UK and come to Sparry Bottom and the rest of Cornwall. Send us photos for a fixed quote, or call 0345 017 0787.

Is it worth repairing rather than replacing?

Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

Is there any odour?

A little, depending on the job. Open windows and an extractor fan help.

How long is the bath unusable?

Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.

Can I get a quote without a visit?

Nearly always. We only ask to see it in person if the pictures cannot show what we need.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day.

Do you cover the whole of Cornwall?

Across the UK, so Sparry Bottom is covered. Our prices are the same everywhere.

Does re-enamelling smell?

There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.

Bath re-enamelling in Sparry Bottom, done in place

We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s an original cast iron bath that needs restoring and thin, worn enamel in places, we can usually put it right.

Your repair is guaranteed for a year, as with every job we do.

Before and after: an old basin refinished to bright white
Where
Sparry Bottom (TR16)
Area hub
Cornwall
Cover
One year on every repair
Quote
From £350. Free, fixed quote from pictures
Phone
0345 017 0787
Updated
23 October 2026

For landlords and businesses

For anyone letting property in or around Sparry Bottom, we’ll quote for several properties at once. Send photos for each one and we’ll come back with a combined price.

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.

About Sparry Bottom

Sparry Bottom is about 2 miles east of Redruth, in Cornwall. From the centre of Sparry Bottom to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Our repair technicians cover all 644 towns and villages across Cornwall, from the larger towns to small villages.

Every address in TR16 is within our area, from the main roads to the quietest streets. Other places close to Sparry Bottom include Carharrack (1 mile north-west), Crofthandy (1 mile north), Goon Gumpas (1 mile north-east), St Day (1 mile north-west) and Gwennap (1 mile south). We also work in nearby towns such as Truro (6 miles north-east), Newquay (14 miles north), Falmouth (7 miles south-east), Camborne (5 miles west), Helston (10 miles south-west) and Hayle (11 miles west).

What’s near Sparry Bottom

Typical jobs here are in homes near St Piran Mission Church, St Day and Carharrack Community School and The Carharrack Stars pub. The nearest railway station is Redruth station, about 2.3 miles west. Further afield, we also cover the area around Camborne Redruth Community Hospital (3.1 miles west) and Museum of Cornish Methodism (less than half a mile north-west). Not far away are Carnmenellis.

Map of Sparry Bottom © OpenStreetMap contributors

Repairs by material

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

DIY repairs versus a professional job

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

When to call us in Sparry Bottom

In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.

Signs it’s time to call us include:

  • A coloured bath you want in white
  • Thin, worn enamel in places
  • Enamel that is lost its shine and feels rough
  • A coating lifting around the plughole

Questions to ask before booking

  • How long the guarantee is and what it covers
  • How the colour is matched
  • How long it needs to cure
  • How changes to the job are handled

10 questions to ask before you book

Why repair rather than replace?

Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Prices start from £350. The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before you book.

Why choose Surface Doctor in Sparry Bottom

  • A fixed quote before you book
  • Typically one visit, start to finish
  • We leave the room as we found it
  • CHAS and Constructionline accredited

See our pricing and guide to resurfacing and replacement costs.

How to care for the repair

Simple care helps the repair last. Our advice:

  • Avoid suction-cup mats
  • Leave the bath for the full curing time before using it
  • Fix dripping taps quickly
  • Dry the bath after use to stop limescale

Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.

Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.

Honest limits

A few problems are outside what a surface repair can do:

  • An acrylic bath that flexes badly underfoot
  • Steel that has corroded right through
  • Leaking taps or wastes (a plumber’s job)

Not sure? Send pictures and we will give you a straight answer before you book.

Materials we work on in Sparry Bottom

  • Cast iron baths
  • Victorian roll-tops
  • Acrylic baths
  • Basins & shower trays
  • Pressed steel baths

How it works

The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes most of the day. Before we leave, we explain the curing time and the aftercare.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Preparing for the visit

  • Make sure the room can be ventilated
  • Let us know which floor the room is on
  • Plan for the room to be out of bounds to pets and children

How to get a price

Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.

Get a free quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.