Gloucestershire · England
Bath Re-enamelling for St Briavels homes
Bath re-enamelling for St Briavels, without a refit. Get a fixed price from your pictures, then book a visit.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Several chips and rust patches
What we’re called out for in St Briavels
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Common reasons people in St Briavels contact us include:
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
What your quote should include
- How long the guarantee is and what it covers
- Whether cleaning and preparation are in the price
- Who turns up on the day
- Whether the price is fixed and includes VAT
Bath re-enamelling in St Briavels, done in place
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we do not cut corners on it. If you’re dealing with stains that won’t shift and several chips and rust patches, we can normally put it right, whatever the material.
All our work is covered by a one-year guarantee, wherever you are in Gloucestershire.
- Where
- St Briavels (GL15)
- County
- Gloucestershire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near St Briavels
Also in St Briavels
Repairs by material
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- Do not use the bath until it has fully cured
- Store bottles off the bath
- Dry the bath after use to stop limescale
- A dripping tap should be fixed promptly
Use mild, non-abrasive cleaners, do not use suction bath mats, and don’t leave bottles or razors standing on the surface.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
How it works
Visits start with a quick look at the job together. After that, protection goes down around the work area and we start. It normally takes a full day, and we will keep you posted as we go.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Let us know if it has been repaired before
- Tell us about parking, stairs or access
- Let the surface dry out before the visit
Getting a price
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed quote. Quotes are free and no obligation.
Read more
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Landlords, agents and businesses in St Briavels
Landlords, letting agents and housing providers in St Briavels use us as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Questions from St Briavels
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders in St Briavels.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Can you repair something that is been repaired before?
Yes, we frequently do. It can add a little time, which we include in the quote.
Do you come to St Briavels?
Yes. We work across the UK and come to St Briavels and the rest of Gloucestershire. Send us photos for a fixed quote, or call 0345 017 0787.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Prices and what affects them
Prices start from £350. You will not pay by the hour. The price is based on:
- The type of damage
- The colour and finish to match
- How many areas need work
- Any earlier repairs that need removing first
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Send photos for a quote
The better the photos, the more accurate the price. Here’s what helps:
- Details of any past repairs
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- A wider photo showing the entire bath
Upload a photo of the damage and one of the entire item, with your GL15 postcode, and we will come back with a fixed quote.
St Briavels and nearby
St Briavels is about 7 miles north of Chepstow, in Gloucestershire. Jobs in St Briavels are booked in like any other job: a fixed quote from photos, then a visit to do the work. Our repair technicians cover 470 places across Gloucestershire. You can also see our page for Birmingham, about 60 miles away.
Every address in GL15 is within our area, from the main roads to the quietest streets. Streets in the area include High Street, Castle Crescent and Barrowell Lane. We also travel to Coldharbour (1 mile south-west), The Fence (1 mile north-west), Hewelsfield Common (1 mile south-west), The Triangle (2 miles south-west) and Trow Green (2 miles north-east). Larger places within reach include Lydney (5 miles east), Cam (12 miles east), Stonehouse (15 miles east), Dursley (13 miles east), Cinderford (8 miles north-east) and Coleford (4 miles north).
Landmarks near St Briavels
Typical jobs here are in homes near St Briavels Parochial Church of England Primary School and Church of St Mary. For rail, the closest station is Lydney station, roughly 4.9 miles east. Well-known places in the area include Cinderbury Iron Age Experience (2.6 miles north-east) and St Briavels Castle (under half a mile north-west). The countryside around St Briavels includes Beddick Hill and The Park & Poor's Allotment Nature Reserve.
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- Plumbing leaks, which need a plumber
- An acrylic bath that flexes badly underfoot
- Problems we can’t see until an old finish comes off
If in doubt, send pictures and we will say what we think before booking.
Surfaces we repair
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
