Cornwall · England
Bath Re-enamelling in St Just
Local bath re-enamelling for St Just: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- An outdated colour you’d like to change
Bath re-enamelling at your home in St Just
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. We regularly repair basins & shower trays, acrylic baths and pressed steel baths, and the jobs we see most are enamel that’s lost its shine and feels rough and brown or grey marks that don’t clean off.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- St Just (TR19)
- Area hub
- Cornwall
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Our work in St Just
St Just (also: St Just in Penwith) is about 6 miles west of Penzance, in Cornwall. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. St Just is one of 644 towns and villages in Cornwall where we work.
We work across the TR19 postcode area. We regularly work on streets such as Market Street, Market Square and Chapel Street and the roads around them. St Just sits on or near the A3071 and B3306, so getting to you is simple. Neighbouring places we cover include Tregeseal (1 mile north-east), Bosorne (1 mile south-west), Boscean (1 mile north-west), Botallack (1 mile north) and Carnyorth (1 mile north). Larger places within reach include Penzance (6 miles east), Hayle (13 miles east), St Ives (11 miles north-east), Newlyn (6 miles east), Carbis Bay (11 miles north-east) and Foundry (12 miles east).
Around St Just
Our customers here include homes close to St Just in Penwith Parish Church, St Just Primary School and Cape Cornwall Secondary School and the streets around them. A little further out are Watermill near Bosigran Castle (4.5 miles north-east). For a walk, there is Carn Kenidjack.
Repair or replace in St Just?
Replacing a bath usually involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why St Just customers choose us
- Fixed prices from your photos
- No extra charge for your area
- Straight answers about what a repair can do
- Most jobs done in one visit
Take a look at our pricing and resurfacing vs replacement cost guide.
The process
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the work takes the best part of a day. Before we leave, we explain the curing time and the aftercare.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Tell us if there are stairs or a lift
- Avoid using the area for a few hours before we arrive
How to get a price
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Read more
St Just questions
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in St Just.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Also in St Just
How to care for the repair
Simple care helps the repair last. Our advice:
- Stick to gentle, non-abrasive cleaners
- Get any chip repaired quickly
- Don’t let dyes or oils sit on the finish
- Leave the bath for the full curing time before using it
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Signs you need bath re-enamelling in St Just
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Signs it’s time to call us include:
- Chips and rust in more than one place
- Wear marks under the taps
- Brown or grey marks that do not clean off
- A coating lifting around the plughole
Comparing quotes
- What preparation is included
- Whether a trained technician does the job
- If travel is included in the price
- What happens if the damage is worse than the pictures show
Landlord and trade work in St Just
If you manage property in St Just, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.
We work for landlords, letting agents and housing providers in St Just as well as homeowners. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
What we cannot put right
It helps to know what we cannot do too:
- Leaks from fittings rather than the bath
- Steel that has corroded right through
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we will say what we think before you book.
Materials we repair
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
