Stirling · Scotland
Bath Re-enamelling for St. Ninians homes
Bath re-enamelling in St. Ninians without the cost of replacing. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- An original cast iron bath that needs restoring
Bath re-enamelling in St. Ninians without replacing anything
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Common call-outs are for staining under the taps and around the waste and a coloured bath you want in white, across acrylic baths, basins & shower trays and Victorian roll-tops.
Whatever the size of the job, it’s backed by a one-year guarantee in St. Ninians and across Stirling.
- Where
- St. Ninians (FK7, FK8)
- County
- Stirling
- Warranty
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Also near St. Ninians
Also in St. Ninians
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
St. Ninians and the surrounding area
St. Ninians is about 1 mile south of Stirling, in Stirling. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. St. Ninians is one of 55 places in Stirling where we work. You can also see our page for Glasgow, about 22 miles away.
Jobs in FK7 and FK8 are booked in the same way as anywhere else. Local streets include Kent Road, Modan Road and Broom Road. Neighbouring places we cover include Kings Park (1 mile north), Torbrex (1 mile north-west), Braehead and Broomridge (1 mile east), Stirling (1 mile north) and Cambusbarron (1 mile north-west). Further out, we also cover Dunblane (6 miles north), Bridge of Allan (3 miles north), Callander (14 miles north-west), Cowie (3 miles south-east), Plean (4 miles south-east) and Balfron (15 miles west). As one of the bigger places in Stirling, St. Ninians sees plenty of our work.
Landmarks near St. Ninians
Locally, our jobs take us to homes close to Kings Park, Stirling and Hotel. The closest station to St. Ninians is Stirling station, roughly 1.2 miles north of the centre. Further afield, we also cover the area around Stirling Castle (1.5 miles north) and Thistles Centre (1 mile north). Open spaces near St. Ninians include Gillies Hill and Airthrey Loch.
The process
We begin by going over the job with you. Then the area is sheeted and masked and we start. You can expect it to take a full day.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Point us to the nearest place to park
- Keep children and pets away from the room on the day
- Clear toiletries, mats and anything else from around the area
Getting a price
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Related advice
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
What bath re-enamelling costs
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- How many items we do on one visit
- How easy the damage is to reach
- How much damage there is
- What kind of damage it is
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Quotes from your pictures
Two or three clear photos are normally enough. It helps if you send:
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
- One picture of the whole bath
- Any details about the material
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Should you replace it?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before you book.
Why St. Ninians customers choose us
- We leave the room as we found it
- No need to remove anything
- We come to you, anywhere in the UK
- Honest advice, even when it means no job
See our pricing or bath cost comparison.
Your questions about bath re-enamelling in St. Ninians
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Can you redo someone else’s repair?
In most cases. The old repair comes out first.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- Wipe the bath dry after use in hard water areas
- Have chips seen to early
- A dripping tap should be fixed promptly
- Don’t use the bath until it has fully cured
A quick rinse and wipe after use helps, particularly where water is hard, so limescale cannot build up.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
What we’re called out for in St. Ninians
Frequently the bath has just had decades of use, with nothing wrong except the surface. Underneath, a cast iron or steel bath is normally as strong as ever.
Get in touch if you’ve noticed any of these:
- Staining under the taps and around the waste
- An outdated colour you’d like to change
- A period or roll-top bath worth keeping
- Wear marks under the taps
What to look for in a quote
- What happens if the damage is worse than the photos show
- Aftercare advice
- A fixed quote, and whether VAT is included
- What the guarantee covers, and for how long
About our accreditations · Every repair comes with a one-year guarantee.
