Stirling · Scotland
Bath Re-enamelling for Callander homes
Our technicians come to Callander for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- Stains that won’t shift
How we handle bath re-enamelling in Callander
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Common call-outs are for an outdated colour you’d like to change and a coating lifting around the plughole, in pressed steel baths, acrylic baths and cast iron baths.
Whatever the size of the job, you get the same one-year guarantee.
- Location
- Callander (FK17)
- County
- Stirling
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Aftercare tips
Most damage we see is avoidable. These habits help:
- Store bottles off the bath
- Respect the curing time we give you
- Clean with a soft cloth and mild detergent
- Get any chip repaired quickly
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
Other services in Callander
Common problems we fix in Callander
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
These are the problems we’re asked about most:
- Enamel that is lost its shine and feels rough
- Brown or grey marks that don’t clean off
- Several chips and rust patches
- An old resurfacing that is failing
Before you book anyone
- Who will actually do the work
- A fixed price, and whether VAT is included
- How the colour is matched
- How your room will be protected
What we do, step by step
We agree an arrival time beforehand. On site, it takes the best part of a day in most cases. We leave the room clean and ready to use once it has cured.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Open a window if you can
- Plan for the room to be out of bounds to pets and children
- Tell us if there are stairs or a lift
Get a quote
Email us photos of the damage and one of the whole item, with your FK17 postcode, and we’ll come back with a fixed quote.
Related advice
Your questions about bath re-enamelling in Callander
Can I get a quote without a visit?
Nearly always. If photos do not show enough, we’ll ask for another angle.
Is there a smell?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before and we’ll plan for it.
Will the bath be moved?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Can you do the outside of a roll-top?
Yes. Inside and out.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Landlords, agents and businesses in Callander
We regularly work with letting and managing agents. Send the address, photos and access details and we will arrange it.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
What a repair cannot fix
A few problems are outside what a surface repair can do:
- Problems we can’t see until an old finish comes off
- Acrylic that moves when you stand in it
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
Why repair rather than replace?
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, so there’s no premium for Callander. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why choose Surface Doctor in Callander
- Dust sheets down, tidy finish
- We come to you, anywhere in the UK
- Fixed prices from your photos
- Most jobs done in one visit
See our full price list or guide to resurfacing and replacement costs.
Our work in Callander
Callander is about 14 miles north-west of Stirling, in Stirling. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. Our repair technicians cover 55 places in Stirling. You can also see our page for Glasgow, about 27 miles away.
We cover every part of FK17. You will find streets such as Main Street, Ancaster Square and Station Road, all of which we cover. Callander is on the A81 and A84, so it’s easy for us to reach. We also cover the places around Callander: Kilmahog (2 miles west), Drumvaich (3 miles south-east), Thornhill (5 miles south-east), Brig o'Turk (6 miles west) and Deanston (6 miles south-east). We also work in nearby towns such as Stirling (14 miles south-east), Dunblane (10 miles east), St. Ninians (14 miles south-east), Raploch (13 miles south-east), Cornton (13 miles south-east) and Torbrex (14 miles south-east). As one of the bigger places in Stirling, Callander is somewhere we visit frequently.
Around Callander
Typical jobs here are in homes near The Waverley Hotel, St Bride's Church and McLaren High School. Further afield, we also cover the area around Ruskie Small Farm Museum (3.9 miles south). Not far away are Loch Letter.
About our accreditations · Every repair comes with a one-year guarantee.
