Stirling · Scotland
Bath Re-enamelling in Dunblane
We travel to Dunblane for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Worn patches where water runs and sits
- A coating lifting around the plughole
Repair or replace: which is better?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. Otherwise, resurfacing usually wins. Our bath re-enamelling starts from £350. We don’t add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- CHAS and Constructionline accredited
- Every repair guaranteed for a year
- Most jobs done in one visit
- Dust sheets down, tidy finish
Take a look at our pricing and bath cost comparison.
Bath re-enamelling in Dunblane, done in place
Most baths are re-enamelled in a day. Taps, tiles, panels and plumbing all stay in place. Whether it’s a roll-top that’s seen better days and a bath that stays dull however much you clean it, we can help.
All our work is covered by a one-year guarantee.
- Where
- Dunblane (FK15)
- Area hub
- Stirling
- Cover
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in Dunblane
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, generally first under the taps and around the waste.
If you can see any of these, send us a picture:
- An original cast iron bath that needs restoring
- An outdated colour you’d like to change
- Enamel that is lost its shine and feels rough
- Worn patches where water runs and sits
What to look for in a quote
- What happens if the damage is worse than the pictures show
- How long it needs to cure
- Whether cleaning and preparation are in the price
- A fixed quote, and whether VAT is included
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
Dunblane questions
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Do you work in Dunblane?
We do. Repair technicians travel to Dunblane from across the region, with no extra charge for travel.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
What happens once I’ve sent pictures?
We come back with a fixed price, usually with dates to choose from. You’re under no obligation.
What affects the price in Dunblane
Resurfacing from £350. You’ll know the full cost before booking. We take into account:
- How many items we do on one visit
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it.
How to get a fixed price
Before you send photos, a few simple things make all the difference:
- Any earlier repairs or coatings
- One picture of the whole bath
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and you’re under no obligation.
Covering Dunblane
Dunblane is about 5 miles north of Stirling, in Stirling. Wherever you are in the FK15 postcode area, we come to you. We work in 55 places in Stirling, from the larger towns to small villages. Our nearest city page is Glasgow, about 26 miles away.
Postcode districts we cover here: FK15. That includes homes on High Street, Station Road and The Cross. Being close to the A820 and B8033, Dunblane is simple for us to get to. Close by, we cover Bridge of Allan (3 miles south), Cornton (4 miles south), Raploch (4 miles south), Causewayhead (4 miles south-east) and Riverside (5 miles south). Larger places within reach include Stirling (5 miles south), St. Ninians (6 miles south), Torbrex (6 miles south), Callander (10 miles west), Kings Park (6 miles south) and Bannockburn (7 miles south). Dunblane is one of the larger places we cover in Stirling.
Local landmarks in Dunblane
Our clients here include homes close to Leighton House and Leighton Library and the streets around them. Dunblane has its own railway station: Dunblane station. Nearby you’ll also find Stirling Health and Care Centre (5.8 miles south) and Arnhall Castle (2 miles south-west). Green spaces nearby include Hill of Row and Airthrey Loch.
Looking after it afterwards
Nothing complicated is needed:
- Do not leave a chip unrepaired
- A quick wipe after use keeps limescale away
- Wash away dyes and oils after use
- Avoid suction-cup mats
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
The process
On the day itself, there is little for you to do. Let us in and show us the room, and we’ll get on with it. Most visits take a full day, including clearing up.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
How to prepare
- Have a window or extractor fan available
- Keep children and pets away from the room on the day
- Mention any parking restrictions or tricky access
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Read more
Places near Dunblane
Also in Dunblane
What a repair can’t fix
In fairness, there are a few things a repair won’t fix:
- Problems we cannot see until an old finish comes off
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that is cracked right through
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
Landlords, agents and businesses in Dunblane
We regularly work with letting and managing agents. Send the address, photos and access details and we will handle the rest.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
About our accreditations · Every repair comes with a one-year guarantee.
