Shropshire · England
Bath re-enamelling & resurfacing in Stableford, Shropshire
Local bath re-enamelling for Stableford: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Chips and rust in more than one place
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- A bath split right through the body
- Anything hidden under an old coating, until we remove it
- Leaks from fittings rather than the bath
Send us pictures and we will tell you honestly before booking.
Materials we work on in Stableford
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
About our bath re-enamelling in Stableford
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We regularly repair acrylic baths, pressed steel baths and basins & shower trays, and common reasons people contact us are an original cast iron bath that needs restoring and enamel that’s lost its shine and feels rough.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Where
- Stableford (WV15)
- Area hub
- Shropshire
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Repair dripping taps early
- Keep toiletries on a shelf rather than in the bath
- Have chips seen to early
- Don’t use the bath until it has fully cured
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Landlord and trade work in Stableford
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Stableford questions
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we have finished.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Do you charge for travel?
We don’t add a call-out fee. Your fixed price includes everything.
Is repairing better than replacing?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Can you repair something that’s been repaired before?
In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.
What if the damage is worse than the photos show?
Your quote covers the damage in the photos. If there is more, we’ll tell you before starting.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
When to call us in Stableford
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Clients generally contact us about:
- A dull, rough surface that will not come clean
- A roll-top that’s seen better days
- Stains that will not shift
- Thin, worn enamel in places
What to look for in a quote
- Whether a trained technician does the job
- Whether they match the colour on site
- A fixed quote, and whether VAT is included
- How the room is protected while they work
Our work in Stableford
Stableford is about 4 miles north-east of Bridgnorth, in Shropshire. Wherever you are in the WV15 postcode area, we come to you. We work in 433 places in Shropshire. We work right across the region, from Stableford to Birmingham (about 21 miles away).
Our technicians cover all of WV15. We also cover the places around Stableford: Ackleton (1 mile east), Worfield (2 miles south), Oldington (2 miles west), Stockton (2 miles west) and Kingslow (2 miles east). Further out, we also cover Madeley (5 miles north-west), Bridgnorth (4 miles south-west), Shifnal (6 miles north), Broseley (6 miles west), Albrighton (5 miles north-east) and Much Wenlock (8 miles west).
Around Stableford
Our customers here include homes close to Church of St Giles, among other places. For rail, the closest station is Cosford station, about 4.8 miles north-east. Well-known places in the area include Ryton Castle Hillfield (2.6 miles north) and Bridgnorth Community Hospital (4.2 miles south-west).
What else we do in Stableford
What happens on the day
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes the best part of a day, and we leave the room as we found it.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the next day, the bath is ready.
Getting ready for the visit
- Tell us about parking, stairs or access
- Avoid using the area for a few hours before we arrive
- Let us know which floor the room is on
Getting a price
To get a price, send two or three pictures through our quote form or call us. We’ll say right away if a repair is the right fix.
Advice
How we price bath re-enamelling
Prices start from £350. We do not charge extra for travel to Stableford. The price comes down to:
- The material
- How hard the colour is to match
- Whether old repairs or coatings need taking off
- The type of damage
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
How to get a fixed price
Phone photos are fine, there is no need for anything special. Make sure they show:
- One sharp close-up of the damage
- Any details about the material
- A picture taken from further back
- Your postcode, so we can check dates
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
