Shropshire · England
Bath re-enamelling & resurfacing in Stockton, Shropshire
Full bath re-enamelling and resurfacing at your home in Stockton, with a one-year guarantee on every repair.
- Resurfacing from £350
- Chips and rust in more than one place
- An original cast iron bath that needs restoring
Common questions in Stockton
Can you redo someone else’s repair?
Most of the time. Tell us what was done before and we’ll plan for it.
Do you work in Stockton?
We do. We send a technician to Stockton for every job, with no extra charge for travel.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Can you price it without visiting?
In nearly every case. If pictures do not show enough, we’ll ask for another angle.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
About our bath re-enamelling in Stockton
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Our repair technicians work on cast iron baths, Victorian roll-tops and acrylic baths, and common reasons people get in touch are an original cast iron bath that needs restoring and a bath that stays dull however much you clean it.
Big or small, it’s backed by a one-year guarantee.
- Area
- Stockton (TF11)
- Area hub
- Shropshire
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Where we work around Stockton
Stockton is about 4 miles south-east of Madeley, in Shropshire. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. Our repair technicians cover all 433 towns and villages across Shropshire. You can also see our page for Birmingham, about 23 miles away.
Postcode districts we cover here: TF11. Whether you live on Village Road, Bridgnorth Road and Cheswardine Lane or a nearby road, we can come to you. If you are just outside Stockton, we cover Oldington (1 mile south), Stableford (2 miles east), Ackleton (3 miles east), Worfield (3 miles south-east) and Wyken (4 miles south-east). Larger places within reach include Madeley (4 miles north-west), Bridgnorth (4 miles south), Shifnal (5 miles north), Sutton (15 miles north-west), Broseley (4 miles west) and Albrighton (6 miles north-east).
Around Stockton
Our customers here include homes close to Hundred House Hotel and Church of St Chad. Further afield, we also cover the area around Ryton Castle Hillfield (2.7 miles north-east) and Museum of The Post Office In The Community (3.2 miles north-west).
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Common problems we fix in Stockton
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
If you can see any of these, send us a photo:
- Staining under the taps and around the waste
- An old resurfacing that’s failing
- Wear marks under the taps
- Lots of chips and rust spots
What to look for in a quote
- When it can be used again
- A fixed price, and whether VAT is included
- How to look after the finish
- How your room will be protected
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- Have chips seen to early
- Wipe the bath dry after use in hard water areas
- Clean with a soft cloth and mild detergent
- Do not let dyes or oils sit on the finish
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Landlords, agents and businesses in Stockton
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Other services in Stockton
Repair or replace in Stockton?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. Compared with replacing, repairing typically costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
What you get with us
- One-year guarantee on every repair
- Rooms protected and left tidy
- Nothing taken out or refitted
- No extra charge for your area
See our pricing and guide to resurfacing and replacement costs.
How the visit works
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we are doing. Most jobs take a full day, and you can get on with other things while we’re there.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Keep children and pets away from the room on the day
- Ensure the area is dry
How to get a price
To get a price, send a couple of photos using our quote form or call us. We will say immediately whether it can be repaired.
Related advice
Honest limits
In fairness, some problems need a different fix:
- A metal bath with a through crack
- Leaks from fittings rather than the bath
- A poorly supported acrylic bath, until it’s firmed up
Send us pictures and we’ll tell you honestly before booking.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
Prices and what affects them
Resurfacing from £350. You’ll know the full cost before booking. We take into account:
- Doing more than one item at once
- The type of damage
- What the surface is made of
- How much damage there is
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed price
Good pictures mean an accurate price. Here’s what we find most useful:
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
- A wider photo showing the whole bath
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
