North Yorkshire · England
Bath re-enamelling & resurfacing in Stackhouse, North Yorkshire
Damaged bath in Stackhouse? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Worn patches where water runs and sits
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
About our bath re-enamelling in Stackhouse
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we don’t cut corners on it. Whether it’s a peeling or bubbling previous coating and lots of chips and rust spots, we can generally put it right, whatever the material.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Area
- Stackhouse (BD24)
- County
- North Yorkshire
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Stackhouse
What else we do in Stackhouse
Your questions about bath re-enamelling in Stackhouse
How long will the bath be out of use?
One day for most baths, ready the next day. We give you timings with the quote.
Do you come to Stackhouse?
Yes, we do. Repair technicians travel to Stackhouse from across the region, with no extra charge for travel.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed price from your photos. Send a close-up and a photo of the entire item and your postcode.
How soon can you come?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Landlord and trade work in Stackhouse
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will arrange it.
If you manage property in Stackhouse, we can repair and quote for several addresses together. Send photos for each one and we will come back with a combined price.
How we price bath re-enamelling
Prices start from £350. We price every job individually, from your pictures. What matters most is:
- Previous DIY repairs that have to come out
- Access to the area
- Whether we combine several jobs
- The material and finish
Compared with replacing, repairing generally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Getting a price from pictures
A couple of clear pictures is all it takes. It helps if you send:
- One sharp close-up of the damage
- One picture of the entire bath
- A coin beside the damage so we can judge size
- Details of any past repairs
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job.
Aftercare tips
Nothing complicated is needed:
- Avoid suction-cup mats
- Do not leave bottles, razors or sponges standing on the surface
- Clean with a soft cloth and mild detergent
- Get any chip repaired quickly
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
What we do, step by step
We work cleanly and quietly, so you can stay at home while we’re there. We protect the area first, then the job itself takes the best part of a day. Before we leave, we explain the curing time and the aftercare.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Make sure the area is dry
- Mention any parking restrictions or tricky access
- Tell us about any previous repairs or coatings
Get a quote
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Advice
Our work in Stackhouse
Stackhouse is about 12 miles north of Barnoldswick, in North Yorkshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We cover 626 places across North Yorkshire. You can also see our page for Leeds, about 35 miles away.
Our repair technicians cover all of BD24 and the streets around it. Close by, we cover Langcliffe (1 mile east), Giggleswick (1 mile south), Settle (1 mile south), Stainforth (1 mile north) and Feizor (2 miles north-west). Larger places within reach include Skipton (14 miles south-east), Grassington (12 miles east), Embsay (14 miles south-east), Gargrave (10 miles south-east), Carleton-in-Craven (14 miles south-east) and Hellifield (6 miles south-east).
Around Stackhouse
We visit homes around Church of St John the Evangelist, The Black Horse pub and Giggleswick Primary School. The nearest railway station is Settle station, roughly 1.2 miles south of the centre. Nearby you will also find Castleberg Hospital (1.1 miles south) and Cob Castle (1.4 miles south).
Common problems we fix in Stackhouse
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Customers generally contact us about:
- Several chips and rust patches
- A bath in a colour that no longer suits
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
What to look for in a quote
- Whether the price is fixed and includes VAT
- The length of the guarantee and what it covers
- Aftercare advice
- What happens if they find more damage
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Anything hidden under an old coating, until we remove it
- Holes rusted through the metal
- An acrylic bath that flexes badly underfoot
Send us photos and we’ll tell you honestly.
Materials we repair
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
