North Yorkshire · England
Bath re-enamelling & resurfacing in Skipton, North Yorkshire
Our repair technicians come to Skipton for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Thin, worn enamel in places
- Several chips and rust patches
Bath re-enamelling at your home in Skipton
Most baths are re-enamelled in a day. Nothing is disconnected or removed. We regularly repair basins & shower trays, Victorian roll-tops and pressed steel baths, and common reasons people contact us are a coloured bath you want in white and a dull, rough surface that won’t come clean.
You get a one-year guarantee, the same in Skipton as everywhere else we work.
- Where
- Skipton (BD23, BD20)
- County
- North Yorkshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What bath re-enamelling costs
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- How much damage there is
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
The price reflects the work involved, not your postcode. You will see the full price before you book.
How to get a fixed price
You can usually get a fixed price without us visiting. To make it quick:
- Something in shot to show the size
- The material, if you know it
- A close-up of the damage, in focus
- Your postcode, so we can check dates
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Common questions in Skipton
Do you work in Skipton?
Yes. We cover the entire UK and travel to Skipton and the rest of North Yorkshire. Send pictures and we’ll quote, or call 0345 017 0787.
Does someone need to be in?
We need someone to let us in. You do not need to watch us work.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed quote from your photos. Send a close-up and a photo of the entire item and your postcode.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you cover the entire of North Yorkshire?
Everywhere in the UK, Skipton included. There’s no extra charge for travel.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
What happens once I’ve sent photos?
We review the pictures and send a fixed quote.
About Skipton
Skipton is about 8 miles north-west of Keighley, in North Yorkshire. Across the BD23 area, we come to you. Skipton is one of 626 towns and villages in North Yorkshire we cover. We work right across the region, from Skipton to Leeds (about 22 miles away).
Jobs in BD23 and BD20 work the same way as everywhere else we cover. From High Street, Fairfax Street and Dawson Street or anywhere nearby, a technician can come to you. Skipton is on the A629 and A6069, which makes it straightforward to reach. Close by, we cover Stirton (1 mile north-west), Carleton-in-Craven (2 miles south-west), Thorlby (2 miles north-west), Cononley (3 miles south) and Broughton (3 miles west). Further out, we also cover Settle (13 miles north-west), Pateley Bridge (14 miles north-east), Grassington (8 miles north), Gargrave (4 miles north-west), Giggleswick (13 miles north-west) and Hellifield (9 miles west). As one of the bigger places in North Yorkshire, Skipton is somewhere we visit frequently.
Landmarks near Skipton
We visit homes around Skipton, The Devonshire pub and Aireville Park. Also close by are Christ Church (less than half a mile south-west) and Ermysted's Grammar School (within half a mile north-west). Skipton has its own railway station: Skipton station. Nearby you will also find Skipton General Hospital (less than half a mile south-west) and Craven Museum (under half a mile north). For a walk, there’s Sharp Haw.
Common problems we fix in Skipton
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Keep an eye out for these signs:
- A coloured bath you want in white
- Enamel that is lost its shine and feels rough
- Stains that won’t shift
- An old resurfacing that is failing
What your quote should include
- If travel is included in the price
- How the colour is matched
- How soon you can use it again
- Who turns up on the day
Landlords, agents and businesses in Skipton
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
How to look after the repair
A little care keeps the finish looking good. Our advice:
- Wipe the bath dry after use in hard water areas
- Respect the curing time we give you
- Clean with a soft cloth and mild detergent
- Get any chip repaired quickly
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Nearby places to Skipton
Other services in Skipton
What happens on the day
Visits start with a quick look at the job together, so there are no surprises. Then the area is sheeted and masked and the work begins. You can expect it to take a full day, and we will tell you if anything changes.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Keep children and pets away from the room on the day
- Move bottles, mats and clutter away from the area
- Make sure the area is dry
Getting a price
The quickest way to a price is to send a couple of photos through our quote form or ring us. We will say right away whether it can be repaired.
Read more
What we can’t put right
Before booking, it’s worth knowing the limits too:
- Anything hidden under an old coating, until we remove it
- Holes rusted through the metal
- A metal bath with a through crack
Send us pictures and we will tell you honestly before you book.
What we work on
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Can I fix it myself?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
