Cumbria · England
Bath re-enamelling & resurfacing in Stainburn, Cumbria
Bath re-enamelling across Stainburn and nearby, done in a single visit in most cases.
- Resurfacing from £350
- A coating lifting around the plughole
- Thin, worn enamel in places
Where we work around Stainburn
Stainburn is about 1 mile north-east of Workington, in Cumbria. Whether you are in the middle of Stainburn or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in all 438 towns and villages across Cumbria. Our jobs stretch from Stainburn to Newcastle upon Tyne (79 miles away).
Postcode districts we cover here: CA14. Local streets include Moor Road, Uldale Road and Linden Walk. If you are just outside Stainburn, we cover Barepot (1 mile south-west), Seaton (1 mile north), Workington (1 mile south-west), Moorclose (1 mile south-west) and Siddick (2 miles north-west). Further out, we also cover Whitehaven (8 miles south), Maryport (5 miles north), Cockermouth (6 miles east), Cleator Moor (9 miles south), Bransty (7 miles south-west) and Egremont (11 miles south).
Local landmarks in Stainburn
Our customers here include homes close to Soul Suite pub, Ashfield Junior School and Workington Academy and the streets around them. For rail, the closest station is Workington station, about 1.6 miles west of the centre. Further afield, we also cover the area around Workington Transport Heritage Trust (0.7 miles north-west) and Dunmail Park (1.6 miles north-west). For a walk, there is Siddick Pond.
How we handle bath re-enamelling in Stainburn
Resurfacing renews the entire surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Common call-outs are for lots of chips and rust spots and stains that won’t shift, on acrylic baths, cast iron baths and Victorian roll-tops.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- Stainburn (CA14)
- County
- Cumbria
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Repairing versus replacing in Stainburn
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Prices start from £350. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so you know the cost before booking.
Why Stainburn clients choose us
- Generally one visit, start to finish
- Colour-matched on site
- Rooms protected and left tidy
- No need to remove anything
Read our full price list or guide to resurfacing and replacement costs.
Aftercare tips
How the surface is treated afterwards matters:
- Store bottles off the bath
- Get any chip repaired quickly
- Never use suction bath mats
- Respect the curing time we give you
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Nearby places to Stainburn
More services for Stainburn
When to call us in Stainburn
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
These are the problems we’re asked about most:
- A peeling or bubbling previous coating
- An original cast iron bath that needs restoring
- Thin, worn enamel in places
- Several chips and rust patches
What your quote should include
- What happens if they find more damage
- Who will actually do the work
- What prep work is covered
- If travel is included in the price
Stainburn questions
Is a repair better than a new one?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Do you resurface freestanding baths?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Do you work in Stainburn?
We do. Technicians travel to Stainburn from across the region, with no extra charge for travel.
How long does re-enamelling take?
One day for most baths, ready the day after. We will confirm timings when we quote.
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Are there extra charges for Stainburn?
No. Our quotes include travel, with the same prices everywhere we work.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
What we cannot put right
We will always be straight with you, so here’s what a repair won’t do:
- A cast iron or steel bath that’s cracked right through
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
Send us pictures and we will tell you honestly.
Materials we work on in Stainburn
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
Landlord and trade work in Stainburn
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
The process
We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and we start. It normally takes the best part of a day.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Let us know which floor the room is on
- Plan for the room to be out of bounds to pets and children
- Clear toiletries, mats and anything else from around the area
Get a quote
Most customers in Stainburn get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
