Central Bedfordshire · England
Bath re-enamelling & resurfacing in Stanford, Central Bedfordshire
Full bath re-enamelling and resurfacing for homes and businesses in Stanford and across Central Bedfordshire. Free, fixed quotes from your photos.
- Resurfacing from £350
- Staining under the taps and around the waste
- Wear marks under the taps
About our bath re-enamelling in Stanford
If your bath is sound but looks tired, re-enamelling is normally the most cost-effective option. It avoids removal, plumbing and re-tiling. We work on Victorian roll-tops, basins & shower trays and cast iron baths, and people most frequently call us about brown or grey marks that don’t clean off and a peeling or bubbling previous coating.
Big or small, it’s backed by a one-year guarantee in Stanford and across Central Bedfordshire.
- Location
- Stanford (SG18)
- Area hub
- Central Bedfordshire
- Guarantee
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
FAQs for Stanford
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Does re-enamelling smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Is the work guaranteed?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Is it worth repairing rather than replacing?
Typically, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How do I get a price for bath re-enamelling in Stanford?
Prices start from £350. Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo with your SG18 postcode.
Keeping it looking good
Nothing complicated is needed:
- Clean with a soft cloth and mild detergent
- Wash away dyes and oils after use
- Repair dripping taps early
- Have chips seen to early
Dry the bath after use if possible, particularly with hard water, and rinse off any bath products.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Do you need bath re-enamelling in Stanford?
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Typical reasons for a call-out include:
- Chips and rust in more than one place
- Wear marks under the taps
- A coloured bath you want in white
- An original cast iron bath that needs restoring
Before booking anyone
- Who will actually do the work
- What happens if they find more damage
- Whether the price is fixed and includes VAT
- How long it needs to cure
How it works
Arrival times are agreed in advance. On site, it takes the best part of a day. We leave the room clean and you’ll know when it can be used.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Avoid using the area for a few hours before we arrive
- Open a window if you can
- Tell us about any previous repairs or coatings
Get a quote
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Advice
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and normally a day, with the bath back in use the following day. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
What you get with us
- Most jobs done in one visit
- A fixed quote before you book
- Technicians who travel to you, UK-wide
- We’ll tell you if it’s not worth repairing
Take a look at our prices page and guide to resurfacing and replacement costs.
Work for landlords and builders
Landlords, letting agents and housing providers in Stanford use us as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Places near Stanford
Other services in Stanford
Stanford and the surrounding area
Stanford is about 3 miles south-west of Biggleswade, in Central Bedfordshire. Our technicians come to homes and businesses in Stanford, so nothing has to leave your home. We work in 121 places in Central Bedfordshire, from the larger towns to small villages. You can also see our page for London, about 39 miles away.
Postcode districts we cover here: SG18. Jobs here include addresses on The Crescent, Old School Lane and Mill Road. Neighbouring places we cover include Southill (1 mile north-west), Clifton (1 mile south), Shefford (2 miles south-west), Old Warden (2 miles north-west) and Campton (3 miles south-west). We also work in nearby towns such as Dunstable (15 miles south-west), Biggleswade (3 miles north-east), Houghton Regis (14 miles south-west), Flitwick (9 miles south-west), Sandy (5 miles north) and Ampthill (8 miles west).
Near you in Stanford
In Stanford, that means homes near Church of All Saints, Southill Lower School and Samuel Whitbread Academy and the streets around them. The nearest railway station is Arlesey station, roughly 2.6 miles south-east. Further afield, we also cover the area around Biggleswade Hospital (3.9 miles north-east) and Jordans Mill (1.8 miles north-east). For a walk, there is Arlesey Old Moat and Glebe Meadows.
When a repair isn’t the answer
Before booking, it’s worth knowing the limits:
- A cast iron or steel bath that’s cracked right through
- A bath that’s rusted through
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- What kind of damage it is
- The colour and finish to match
- Whether we combine several jobs
- Access to the area
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Quotes from your pictures
Good pictures mean an accurate price. Here’s what helps:
- The material, if you know it
- Whether it’s been repaired or coated before
- Something in shot to show the size
- Natural light rather than flash
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
About our accreditations · Every repair comes with a one-year guarantee.
