Shropshire · England
Bath Re-enamelling in Stanton Lacy
Problem with your bath in Stanton Lacy? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- A coloured bath you want in white
Why repair rather than replace?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why book with us
- Free fixed quotes from pictures
- Straight answers about what a repair can do
- Colour-matched on site
- One price list for the entire UK
Read our full price list or guide to resurfacing and replacement costs.
Bath re-enamelling in Stanton Lacy, done in place
Most baths are re-enamelled in a day, with the bath ready to use the following day. Nothing is disconnected or removed. We regularly repair basins & shower trays, pressed steel baths and acrylic baths, and common reasons people contact us are a dull, rough surface that won’t come clean and a bath in a colour that no longer suits.
Every job is backed for twelve months in Stanton Lacy and everywhere else. We return to put right any problem with the work.
- Where
- Stanton Lacy (SY8)
- County
- Shropshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Your questions about bath re-enamelling in Stanton Lacy
Do you work for landlords and businesses?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Is there a call-out fee?
We don’t add a call-out fee. Your fixed price includes everything.
What do you need from me?
Photos of the damage, a picture of the entire bath and your postcode. Then we’ll agree a date.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How long does re-enamelling take?
One day for most baths and can be used the day after. We give you timings with the quote.
What happens if you find more damage?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Is there any odour?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum.
Landlord and trade work in Stanton Lacy
We regularly work with letting and managing agents. Send the address, photos and access details.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
How the visit works
We turn up at the time we agreed with you, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. Most visits take the best part of a day, and we leave the room as we found it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Mention any parking restrictions or tricky access
- Point us to the nearest place to park
Ask for a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Related advice
What we cannot put right
Not everything can be repaired, and we will tell you before we start. We cannot fix:
- Damage hidden under a previous coating, until it’s stripped back
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that is cracked right through
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we repair
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
What bath re-enamelling costs
Resurfacing from £350. We charge the same across the UK, including Stanton Lacy. The price reflects:
- What kind of damage it is
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
How to get a fixed quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A photo taken from further back
- Your postcode, so we can check dates
- One sharp close-up of the damage
- Natural light rather than flash
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed quote back. There’s no charge for the quote and no obligation.
How to look after the repair
Aftercare is simple, and it makes a real difference:
- Don’t use the bath until it has fully cured
- Rinse off hair dye, oils and bath bombs immediately
- Fix dripping taps quickly
- Get any chip repaired quickly
A quick rinse and wipe after use helps, particularly where water is hard, so limescale cannot build up.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Towns and villages near Stanton Lacy
Other services in Stanton Lacy
Covering Stanton Lacy
Stanton Lacy is about 16 miles south-west of Bridgnorth, in Shropshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We cover all 433 towns and villages in Shropshire. Our nearest city page is Birmingham, about 36 miles away.
We cover every part of SY8. Neighbouring places we cover include Bromfield (1 mile south-west), Hayton's Bent (2 miles north-east), East Hamlet (2 miles south-east), Rockgreen (2 miles south-east) and Onibury (3 miles west). We also work in nearby towns such as Church Stretton (10 miles north), Craven Arms (5 miles north-west), Much Wenlock (15 miles north-east), Cleobury Mortimer (11 miles east), Bishop's Castle (13 miles north-west) and Highley (15 miles east).
What’s near Stanton Lacy
In Stanton Lacy, that means homes near Church of St Peter. The closest station to Stanton Lacy is Ludlow station, about 2.5 miles south-east of the centre. Further afield, we also cover the area around Ludlow Museum (2.6 miles south) and Bromfield moated grange (1.7 miles south-west). Open spaces near Stanton Lacy include High Vinnalls.
About our accreditations · Every repair comes with a one-year guarantee.
