Oxfordshire · England
Bath re-enamelling & resurfacing in Stanton St John, Oxfordshire
We travel to Stanton St John for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- A dull, rough surface that will not come clean
Bath re-enamelling in Stanton St John, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. If you’re dealing with an old resurfacing that’s failing and staining under the taps and around the waste, we can usually put it right.
Whatever the size of the job, you get the same one-year guarantee.
- Location
- Stanton St John (OX33)
- Region
- Oxfordshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair is not the answer
In fairness, there are a few things a repair won’t fix:
- Steel that has corroded right through
- Leaks from fittings rather than the bath
- A bath split right through the body
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
Your questions about bath re-enamelling in Stanton St John
Is there a guarantee?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
Do you work in Stanton St John?
We do. Technicians travel to Stanton St John from across the region, with no extra charge for travel.
How long does re-enamelling take?
Most baths are done in a day, ready the following day. We’ll confirm timings when we quote.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Landlord and trade work in Stanton St John
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Housing associations and facilities teams use us for planned and reactive repairs in Oxfordshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Should you replace it?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. In most other cases, resurfacing is the better choice. Prices start from £350. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.
What you get with us
- We leave the room as we found it
- Colour-matched on site
- Technicians who travel to you, UK-wide
- Free fixed quotes from pictures
See our prices page and bath cost comparison.
What we’re called out for in Stanton St John
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
These are the problems we’re asked about most:
- An old resurfacing that is failing
- Worn patches where water runs and sits
- A coloured bath you want in white
- A period or roll-top bath worth keeping
Questions to ask before you book
- How your room will be protected
- How long the guarantee is and what it covers
- What prep work is covered
- Whether the price covers travel
Stanton St John and nearby
Stanton St John is about 4 miles north-east of Oxford, in Oxfordshire. We visit homes and businesses in Stanton St John and nearby villages, so you do not need to take anything anywhere. Stanton St John is one of 443 places in Oxfordshire we cover. Our jobs stretch from Stanton St John to London (about 50 miles away).
Here we cover the OX33 postcode area. Streets in the area include Mill Street, Church Close and Cox Lane, all of which we cover. Close by, we cover Forest Hill (1 mile south), Beckley (1 mile north-west), Barton (2 miles south-west), Risinghurst (2 miles south-west) and Holton (2 miles south-east). Within a short drive, we also cover Oxford (4 miles south-west), Didcot (12 miles south), Bicester (8 miles north), Abingdon-on-Thames (9 miles south-west), Witney (14 miles west) and Thame (9 miles east).
What’s near Stanton St John
We visit homes around Church of St John the Baptist, Katie and George Park and The Star Inn Public House, among other places. The closest station to Stanton St John is Islip station, roughly 4.5 miles north-west of the centre. Further afield, we also cover the area around Oxford Castle (4.7 miles south-west) and Churchill Hospital (2.7 miles south-west). Green spaces nearby include Shotover and Bernwood Meadows.
How to look after the repair
So the finish stays in good condition:
- Wash away dyes and oils after use
- Get any chip repaired quickly
- Dry the bath after use to stop limescale
- Store bottles off the bath
Use mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
The process
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the work takes a full day. At the end we talk you through the curing time and the aftercare.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Let the surface dry out before the visit
- Mention any earlier repairs or resurfacing
- Have a window or extractor fan available
How to get a price
You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Read more
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
Towns and villages near Stanton St John
Also in Stanton St John
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot.
About our accreditations · Every repair comes with a one-year guarantee.
