Kent · England
Bath re-enamelling & resurfacing in Stelling Minnis, Kent
Local bath re-enamelling for Stelling Minnis: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- Several chips and rust patches
What happens on the day
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which typically takes the best part of a day. If anything looks different from your photos, we’ll talk to you before going ahead.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Keep pets and children out of the room while we work
- Have somewhere for us to park nearby if possible
- Avoid using the area for a few hours before we arrive
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Related advice
Bath re-enamelling at your home in Stelling Minnis
We do not move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. Whether it’s brown or grey marks that don’t clean off and a coloured bath you want in white, we can help, on acrylic baths, Victorian roll-tops and pressed steel baths alike.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Stelling Minnis (CT4)
- Region
- Kent
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Our work in Stelling Minnis
Stelling Minnis is about 6 miles south of Canterbury, in Kent. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Stelling Minnis is one of 922 towns and villages in Kent where we work. You can also see our page for London, about 55 miles away.
We cover every part of the CT4 postcode area. That includes homes on Bossingham Road, Ponycart Lane and Minnis Lane and the roads around them. Nearby, we also work in Bossingham (1 mile north-east), Waltham (2 miles west), Rhodes Minnis (3 miles south), Stowting Common (3 miles south-west) and Ottinge (3 miles south). We also work in nearby towns such as Ashford (9 miles west), Canterbury (6 miles north), Dover (11 miles east), Folkestone (8 miles south-east), Whitstable (12 miles north) and Deal (14 miles east).
Around Stelling Minnis
We visit homes around Church of St Mary, Spong Wood and Stelling Minnis Church of England Primary School and the streets around them. Further afield, we also cover the area around Kent and Canterbury Hospital (5.6 miles north).
Aftercare tips
After the repair has cured, a few habits help it last:
- Leave the bath for the full curing time before using it
- Dry the bath after use to stop limescale
- Get any chip repaired quickly
- Do not let dyes or oils sit on the finish
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Repair or replace: which is better?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. We charge the same wherever you are, with no extra for Stelling Minnis. The job itself decides the price: the material, the amount of damage and how many items.
Why book with us
- Colour-matched on site
- We leave the room as we found it
- Same prices wherever you are
- Every repair guaranteed for a year
Read our full price list or bath cost comparison.
FAQs for Stelling Minnis
Someone resurfaced my bath and it’s peeling. Can you help?
Normally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Do you work in Stelling Minnis?
We do. Technicians travel to Stelling Minnis from across the region, and the price is the same as everywhere else.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed price from your pictures. Send a close-up of the damage and a wider photo with your CT4 postcode.
Can you re-enamel a roll-top bath?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Can pets and children be at home?
Just keep them out of the work area. We will let you know when it’s safe to use again.
How long will the bath be out of use?
Generally one day, with the bath ready the next day. Deeply pitted baths may need a second day.
Honest limits
Not everything can be repaired, and we would rather say so up front. We cannot fix:
- Acrylic that moves when you stand in it
- Problems we cannot see until an old finish comes off
- A bath that is rusted through
Not sure? Send photos and we will give you a straight answer before booking.
What we work on
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
Do you need bath re-enamelling in Stelling Minnis?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
The things clients typically mention when they call are:
- An outdated colour you’d like to change
- Several chips and rust patches
- Worn patches where water runs and sits
- A peeling or bubbling previous coating
Questions to ask before booking
- How changes to the job are handled
- Whether the price covers travel
- What prep work is covered
- When it can be used again
Landlords, agents and businesses in Stelling Minnis
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Towns and villages near Stelling Minnis
Also in Stelling Minnis
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
About our accreditations · Every repair comes with a one-year guarantee.
