Kent · England
Bath Re-enamelling in Stocker's Head
Our repair technicians come to Stocker's Head for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- Brown or grey marks that do not clean off
Bath re-enamelling in Stocker's Head without replacing anything
We don’t move the bath, so your taps, tiles and plumbing are left alone. It generally takes one visit, and can be used again the following day. Our technicians work on basins & shower trays, Victorian roll-tops and acrylic baths, and the jobs we see most are a bath in a colour that no longer suits and stains that won’t shift.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Location
- Stocker's Head (TN27)
- County
- Kent
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Looking after it afterwards
Aftercare is simple:
- Store bottles off the bath
- Fix dripping taps quickly
- Avoid suction-cup mats
- Don’t leave a chip unrepaired
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
Prices and what affects them
Resurfacing from £350. There’s no charge for travel to Stocker's Head. The price comes down to:
- Where the damage is and how we get to it
- Doing more than one item at once
- Whether old repairs or coatings need taking off
- The type of damage
There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your pictures
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- A wider photo showing the entire bath
- A clear, close picture of the problem area
If you’re in Stocker's Head and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- A bath that is rusted through
- Anything hidden under an old coating, until we remove it
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
How the visit works
The work is clean and fairly quiet, so you can stay at home while we are there. We protect the area first, then the job itself takes the best part of a day. Before we leave, we explain how soon it can be used and how to care for it.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s typically ready the next day.
Preparing for the visit
- Let the surface dry out before the visit
- Let us know if it has been repaired before
- Keep a parking space free if you can
How to get a price
The quickest way to a price is to send a couple of photos using our quote form or ring us. We will say immediately if a repair is the right fix.
Advice
Signs you need bath re-enamelling in Stocker's Head
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
It’s worth getting a quote if you see:
- Chips and rust in more than one place
- A peeling or bubbling previous coating
- An outdated colour you’d like to change
- A dull, rough surface that will not come clean
What to look for in a quote
- Whether cleaning and preparation are in the price
- Whether the price covers travel
- Whether a trained technician does the job
- Aftercare advice
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Stocker's Head and the surrounding area
Stocker's Head is about 6 miles north-west of Ashford, in Kent. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We cover all 922 towns and villages in Kent, from the larger towns to small villages. We work right across the region, from Stocker's Head to London (about 44 miles away).
Postcode districts we cover here: TN27. Neighbouring places we cover include Charing Hill (1 mile west), Stalisfield (2 miles north), Stalisfield Green (2 miles north), Paddock (2 miles east) and The Valley (2 miles north). We also work in nearby towns such as Maidstone (13 miles west), Ashford (6 miles south-east), Canterbury (12 miles east), Sittingbourne (9 miles north), Whitstable (13 miles north-east) and Faversham (7 miles north-east).
Landmarks near Stocker's Head
Locally, our jobs take us to homes close to Charing Church of England Primary School, Spuckles and Kennelling Woods and King's Head Public House, among other places. Stocker's Head’s nearest station is Charing station, about 1.3 miles south-west of the centre. Other landmarks nearby include Newnham Castle (4.7 miles north).
Landlords, agents and businesses in Stocker's Head
Landlords, letting agents and housing providers in Stocker's Head use us as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
For anyone letting property in or around Stocker's Head, we will quote for several properties at once. Just send photos for each address and we will come back with a combined price.
Common questions in Stocker's Head
Do the materials smell?
There may be a mild smell during the work.
What happens after I send photos?
You’ll get a fixed quote back, plus dates. There’s no obligation to book.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
Do you work in Stocker's Head?
Yes. We cover the whole UK and travel to Stocker's Head. Send us pictures for a fixed quote, or call 0345 017 0787.
What areas do you cover?
All of Kent, and the rest of the UK. There’s no extra charge for travel.
What do you need from me?
Photos of the damage, a photo of the entire bath and your postcode. After that, we just agree a date.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Kent.
Places near Stocker's Head
What else we do in Stocker's Head
About our accreditations · Every repair comes with a one-year guarantee.
